Automatic Transfer Switch Control Modules
Auto Transfer Switch Control Module
The DSE330 Automatic Transfer Switch Control Module monitors the voltage and frequency of an incoming AC supply from two different sources. These sources can be generator or mains (utility), or a combination of both.
The control module monitors Source 1 (S1) and Source 2(S2). When a failure occurs a start command is issued to the inactive source to take over the load. The module will return the load to the mains (utility) as soon as this becomes available.
98 mm x 79 mm x 40 mm (3.9” x 3.1” x 1.6”)
PANEL CUTOUT SIZE
80 mm x 68 mm (3.1” x 2.7”)
MAXIMUM PANEL THICKNESS
0330-01 - 330 Auto Transfer Switch Control Module - 12/24 Volt DC Supply
Request a Quote
Key Features & Benefits
- Additional Features
- Icon or text LCD display.
- LED indicators.
- Configurable timers.
- Start inhibit.
- Load inhibit.
- Multiple topology support.
- Rotary ATS configuration.
- Single event scheduler.
DC SUPPLYCONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
61 mA at 12 V, 62 mA at 24 V
MAXIMUM STANDBY CURRENT
50 mA at 12 V, 51 mA at 24 V
OUTPUTSAUXILIARY OUTPUTS A,B,C,D,E & F
2 A DC at supply voltage
15 V to 333 V AC (L-N)
3.5 Hz to 75 Hz
Environmental Testing Standards
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.
0330-01 - 330 ATS CONTROLLER 12V / 24V DC SUPPLY