Deep Sea Electronics

DSEDse-power

DSE9130

5 Amp 12 Volt Battery Charger

Features

The 5 Amp Battery Charger has been designed to be permanently connected to a battery, keeping it charged to maximum capacity. The chargers can be either mounted via DIN rail or to the chassis, using the fixing holes that are built into the case.

The chargers stylish design includes an LED indicator on the front that shows when the charger is in a normal or overload condition.

The chargers do not include any moving parts to give added durability and reliability. They will also continue to operate during cranking and running. All chargers can accept multiple AC voltage connections.

Get a Quote

Title *

First name *

Surname *

Please enter the characters in the white box below (not case sensitive) *

Company name *

Email address *

Product *

Quantity *

Delivery Location * (Country / Area)

Comments

Main Features
Specification
Downloads
Environmental Testing Standards
Associated Products

Main features

ADVANCED FEATURES

Multi-Stage Intelligent Charging
• Constant current- Maximum
current available during charge
recovery phase
• Constant voltage
• Chargers automatically return to
float mode when charging is
complete

Low Output Ripple
• Makes the chargers ideal for all
battery types

Full Protection
• Reverse polarity protection,
short circuit protection and
current limiting
• Automatic recovery after the
removal of fault conditions

Boost Mode
• Boosts and equalises cell
charge improving battery
performance and life
• Simple boost connection using
on-board terminals

Power Save Mode
• Once the battery is fully
charged the chargers switch to
Eco-Power to save energy

KEY BENEFITS

• Suitable for a wide range of
battery types
• No moving parts for longer
battery charger life
• Switched mode design
• Charge fail output
• Minimum 80% efficiency
throughout full operating range

Paralleling Feature
• Multiple modules can be linked
together to provide larger current
output

Specification

AC SUPPLY

VOLTAGE RANGE
90 V to 250 V (L-N)

DC OUTPUT
5 A DC 12 V DC at 13.7 V DC

RIPPLE AND NOISE
<1%

EFFICIENCY
>80%

REGULATION

LINE
<0.001% Vo

LOAD
1% Vo

PROTECTIONS
Short Circuit
Over Voltage
Over Current
Reverse Polarity

DIMENSIONS

OVERALL
136 mm x 140 mm x 63 mm
5.4” x 5.5” x 2.5”

WEIGHT
0.5 kg

Downloads

Environmental Testing Standards

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30 °C
BS EN 60068-2-2
Bb/Be Dry Heat +55 °C

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 °C
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 °C
@ 93% RH 48 Hours

SHOCK

BS EN 60068-2-7
Three shocks in each of three major axes
15 gn in 11 mS

Associated products

DSE9150
DSE9155

DSE9255
DSE9470