Deep Sea Electronics

DSEDse-power

DSE9260

10 Amp 24 V Battery Charger

Features

The DSE 10 Amp Switch Mode Battery Chargers are designed to be permanently connected to a battery, keeping it charged to maximum capacity. The chargers can be mounted to the chassis or panel using the fixing points or optional DIN rail clips.

The charger’s stylish design includes two LED indicators on the front to show when the charger is connected to the mains/utility supply and to indicate when a fault condition occurs.

 

The chargers do not include any moving parts to give added durability and reliability. They will also continue to operate during cranking and running. Both chargers can also accept multiple voltage connections.

Image of DSE9260

Main features

ADVANCED FEATURES

Multi-Stage Intelligent Charging
• Constant current- Maximum current available during charge recovery phase
• Constant voltage
• Chargers automatically return to float mode when charging is complete

Low Output Ripple
• Makes the chargers ideal for all battery types

Full Protection
• Reverse polarity protection, short circuit protection and current limiting
• Automatic recovery after the removal of fault conditions
 

 

Boost Mode
• Boosts and equalises cell charge improving battery performance and life
• Simple boost connection using on-board terminals

Power Save Mode
• Once the battery is fully charged the chargers switch to Eco-
Power to save energy
 

KEY BENEFITS

• Suitable for a wide range of battery types
• No moving parts for longer battery charger life
• Switched mode design
• Charger fail output
• Minimum 80% efficiency throughout full operating range

Specification

AC SUPPLY

VOLTAGE RANGE
90 V to 305 V (L-N)

FREQUENCY RANGE
48 Hz to 64 Hz (L-N)

DC OUTPUT

OUTPUT
10 A DC 24 V DC at 27.6 V DC

RIPPLE AND NOISE
<1%

EFFICIENCY
>80%

 

REGULATION

LINE
<1% Vo

LOAD
<2% Vo

PROTECTIONS
Short Circuit
Over Current
Reverse Polarity
 

DIMENSIONS

OVERALL
152 mm x 188 mm x 62 mm
6” x 7.4”x 2.44”

WEIGHT
0.8 kg

Downloads

Environmental Testing Standards

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30 °C
BS EN 60068-2-2
Bb/Be Dry Heat +70 °C

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 °C
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 °C
@ 93% RH 48 Hours

SHOCK

BS EN 60068-2-7
Three shocks in each of three major axes
15 gn in 11 mS

Associated products

DSE9140