Deep Sea Electronics

DSEDse-genset

DSE548

LED Expansion control module

This is an obsolete product, no longer available for purchase.

The  DSE548 is an LED expansionmodule for the DSE52xx, DSE53xx and the DSEPower® Series.

The module has been designed to display a maximumof eight local or remote (max 50metres)
individual LED indications.

The DSE548 is presented in a vertical enclosure.

OPERATION

The LED’s are configured using the host module and the appropriate PC software interface.

The LED’s can be configured to be  either:

• Extinguish on command
• Light on command

An additional LED indicates that a DC power supply is being received. There is also a flashing ‘Link Lost’ LED fitted to indicate any communication problems with the host module.

When using two expansion modules together each module should be identified as either ‘A’ or ‘B’. This is done by positioning the selector switch on the rear of each module.

Get a Quote

add another product
remove product
Image of DSE548

Main features

KEY FEATURES

• Eight configurable LEDs
• Works up to 50 meters from the host module
• Two modules can be linked together to provide 16 LED indicators
• Interconnecting FCC 68 cable for quick installation

Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8V and 35V continuous.

CRANKING DROPOUTS
Powered from the plant battery or from a low voltage supply It is able to survive 0V for 50ms during cranking, providing supply was at least 10V before dropout and recovers to 5V. This is achieved
without the need for internal batteries.

MAXIMUM OPERATING CURRENT
20mA @ 12V, 26mA @ 24V

MAXIMUM STANDBY CURRENT
107mA @ 12V, 113mA @ 24V

 

 

A OR B MODE SELECTOR
Recessed Jumper Selector on rear

INDICATIONS
Power On LED
Link Lost (to controller) LED Flashing
8 Configurable LED’s

CONFIGURATION
The module will automatically respond to signals from the host module. The module must be
configured via the host module and a PC. The Expansion LED’s are numbered from 1 to 8 and
appear on the output configuration menu.

DIMENSIONS

OVERALL
144mm x 72mm x 59mm
5.7” x 2.8” x 2.3”
DIN rail mounted housing
 

PANEL CUT-OUT
138.5mm x 68mm
5.5” x 2.7”
 

Downloads

Environmental Testing Standards

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30 °C
BS EN 60068-2-2
Bb/Be Dry Heat +70 °C

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 °C
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 °C
@ 93% RH 48 Hours

SHOCK

BS EN 60068-2-7
Three shocks in each of three major axes
15 gn in 11 mS

DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES

BS EN 60529
IP65 - Front of module when installed into the control panel with the supplied sealing gasket.

Associated products

DSE5210
DSE5220
DSE5310
DSE5320