Deep Sea Electronics

DSEDse-genset

DSE701 MKII

Manual/Auto Start Control Module

Features

The DSE701 MKII controller can be user-configured for Auto or Manual Start operation using the DSE
Configuration Suite Lite PC Software. Alternatively the controller can be ordered pre-configured.

The DSE701 MKII offers an excellent range of engine monitoring and protection features.

The module offers inputs to monitor low oil pressure, high engine temperature and overspeed and
the manual start version also has a user-defined auxiliary input. Auto Start versions also include an input
option for a start signal from a remote location.

When the module detects any of the above faults it will automatically shut down the engine. The module also has the capability to monitor battery charging by utilising the WL terminal on the charge alternator. On detecting a battery charging fault, it will light the warning LED on the front panel.

The Auto Start version can be user-configured for Manual Start operation and the Manual Start version can be user-configured for Auto Start operation.

Get a Quote

Title *

First name *

Surname *

Please enter the characters in the white box below (not case sensitive) *

Company name *

Email address *

Product *

Quantity *

Delivery Location * (Country / Area)

Comments

Main Features
Specification
Downloads
Environmental Testing Standards
Associated Products

Main features

KEY FEATURES

• Configurable Auto and Manual Start versions
• Remote start input available (when in Auto Start mode)
• Auxiliary shutdown input available (when in Manual Start mode)
• Engine monitoring and protection
• LED status indication
• Automatic engine pre-heat
• Overspeed protection
• Front panel mounting

KEY BENEFITS

• The DSE701 MKII comes pre-configured for frequency (speed sensing) but can be user-configured for magnetic pick-up
• Uses DSE813 USB Communications Adaptor and DSE Configurations Suite Lite PC Software for simple configuration
• Licence-free PC Software
• User-friendly set-up and fascia layout

Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

MAXIMUN OPERATING CURRENT
26 mA at 12 V, 27 mA at 24 V

MAXIMUM STANDBY CURRENT
20 mA at 12 v, 21 mA at 24 V

CHARGE/FAIL EXITATION RANGE
0 V TO 35 V

OUTPUTS

START
Solid state 1.2 A negative grounding terminal

RUN
Solid state 1.2 A negative grounding terminal

PRE-HEAT
Solid state 1.2 A negative grounding terminal

GENERATOR

VOLTAGE RANGE
15 V - 333 V AC (L-N)

FREQUENCY RANGE
3.5 Hz to 75 Hz

DIMENSIONS

OVERALL
72 mm x 72 mm x 38 mm
2.8” x 2.8” x 1.5”
Excludes key switch

PANEL CUT-OUT
68 mm x 68 mm
2.7” x 2.7”

MAXIMUM PANEL THICKNESS
8 mm
0.3”

Downloads

Environmental Testing Standards

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30° C
BS EN 60068-2-2
Bb/Be Dry Heat +70° C

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three
major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40° C
@ 93% RH 48 Hours

SHOCK

BS EN 60068-2-27
Three shocks in each of three major axes
15 gn in 11 mS

Associated products

DSE3110
DSE701

DSE702
DSE813