Deep Sea Electronics

DSEDse-genset

DSE402 MKII

Manual/Auto Start Control Module

Features

The DSE402 MKII is a waterproof Manual/Automatic Start Control Module designed for genset and other applications. The module is designed to start and stop the engine via a manual waterproof key switch on the front panel. It will provide a number of engine protections, automatically shutting down the engine on detection of a fault condition. Provision is also made for an overspeed shutdown from either the MPU or AC Hz (to be specified on ordering).

First-up shutdown alarm is indicated by a steady red LED.

Get a Quote

Title *

First name *

Surname *

Please enter the characters in the white box below (not case sensitive) *

Company name *

Email address *

Product *

Quantity *

Delivery Location * (Country / Area)

Comments

Main Features
Specification
Downloads
Environmental Testing Standards
Associated Products

Main features

KEY FEATURES

• Key start
• Low oil pressure protection
• High engine temperature protection
• Auxiliary shutdown
• PC configurable via DSE813 interface and DSE Configuration Suite PC Software
• Automatic engine pre-heat
• Overspeed protection

KEY BENEFITS

• IP66 rating makes this module ideal for outdoor use
• Potted electronics prevents vibration and water damage
• Licence-free PC Software
• User friendly set up and fascia layout
• Uses DSE Configuration Suite PC Software for simple configuration

Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

MAXIMUM OPERATING CURRENT
120 mA at 12 V, 170 mA at 24 V

TYPICAL OPERATING CURRENT
60 mA at 12 V, 75 mA at 24 V In stop position consumption is zero.

CHARGE/FAIL EXCITATION RANGE
0 V to 35 V

OUTPUTS

FUEL
15 A DC at supply voltage

START
15 A DC at supply voltage

PRE-HEAT
2 A DC at supply voltage

DIMENSIONS

OVERALL
157 mm x 111 mm x 60 mm
6.2” x 4.4” x 2.4”

PANEL CUT-OUT
132 mm x 84 mm

STORAGE TEMPERATURE RANGE
-40°C TO +85°C

OPERATING TEMPERATURE RANGE
-30°C TO +70°C

Downloads

Environmental Testing Standards

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30 °C
BS EN 60068-2-2
Bb/Be Dry Heat +70 °C

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 °C
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 °C
@ 93% RH 48 Hours

SHOCK

BS EN 60068-2-7
Three shocks in each of three major axes
15 gn in 11 mS

DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES

BS EN 60529
IP66

Associated products

DSE402

DSE813