Deep Sea Electronics

DSEDse-genset

DSE6020

Auto Mains (Utility) Failure Control Module

Features

The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.

Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.

The module offers electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engine versions and a number of flexible inputs, outputs and engine protections so the system can be easily adapted to suit a wide range of application demands.

The module can be easily configured using the DSE Configuration Suite PC software.  Selected front panel editing is also available.

Get a Quote

add another product
remove product
Image of DSE6020

Main features

KEY FEATURES

• Back-lit icon LCD display
• Front panel editing
• LED and LCD alarm indication
• Power Save mode
• CAN and Magnetic Pick-up/Alt.
versions available (specify on
ordering)
• PC and front panel
configuration
• 4 Digital inputs
• 3 Analogue inputs
• 6 Outputs (4 configurable on
Magnetic Pick-up/Alt., 6
configurable on CAN version)
• Configurable timers and alarms
• Alternative configuration
• Event Log (5)
• Remote Start input
• 3 Phase generator monitoring
• Current Monitoring and protection

 

• 3 Phase Mains (Utility)
monitoring
• Test button
• Battery Voltage monitoring
• Engine pre-heat
• Hours counter
• Comprehensive shutdown or
warning on fault condition

KEY BENEFITS

• Automatically transfers between
mains (utility) and generator
power
• Hours counter provides accurate
information for monitoring and
maintenance periods
• User-friendly set-up and button
layout
• Multiple engine parameters are
monitored simultaneously
• Module can be configured to
suit individual applications
• Compatible with a wide range
of CAN engines
• Uses DSE Configuration Suite
PC software for simplified
configuration
• IP65 rating (with optional
gasket) offers increased
resistance to water ingress
• Licence-free PC software

Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
150 mA at 12 V, 80 mA at 24 V

MAXIMUM STANDBY CURRENT
50 mA at 12 V, 30 mA at 24 V

CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

MAINS (UTILITY)

VOLTAGE RANGE
15 V - 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz

OUTPUTS

OUTPUT A (FUEL)
2 A DC at supply voltage

OUTPUT B (START)
2 A DC at supply voltage

AUXILIARY OUTPUTS C,D,E & F
2 A DC at supply voltage

GENERATOR VOLTAGE RANGE
15 V - 333 V AC (L-N)

FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICK UP VOLTAGE RANGE
+/- 0.5 V to 70 V
 

DIMENSIONS

OVERALL
215 mm x 158 mm x 42 mm
8.5” x 6.2” x 1.6”

PANEL CUT-OUT
182 mm x 137 mm
7.2” x 5.4”

MAXIMUM PANEL THICKNESS
8 mm
0.3”

Environmental Testing Standards

ELECTRO-MAGNETIC  COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30°C
BS EN 60068-2-2
Bb/Be Dry Heat +70°C

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three
major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40° C
@ 93% RH 48 Hours

SHOCK

BS EN 60068-2-27
Three shocks in each of three Major axes
15 gn in 11 mS

DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES

BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.

Associated products