[ Skip Navigation ]

DSE Products

  • DSEExtra
  • DSE9240 (Obsolete)
  • 24 Volt Switch Mode Battery Charger

  • The DSE9240 is 3.5 Amp battery charger suitable for 24 Volt lead-acid batteries.

     

    • Lightweight
    • Compact design
    • Can remain operational during engine cranking and running 
    • Suitable for connection to a wide range of AC voltages between 100V and 240V, 50Hz or 60Hz.  
    • No moving parts
    • Switch mode design
    • Overload & short circuit protection
    • LED charging indicator
    • Convection cooling
    • Minimum 80% efficiency throughout full operating range

     

             

  • Downloads
  • T (Translations)
  • Diagrams ( PDF )
  • DataSheet ( A4 / US )

Further Information

Main Features
  • Lightweight
  • Compact design
  • Can remain operational during engine cranking and running 
  • Suitable for connection to a wide range of AC voltages between 100V and 240V, 50Hz or 60Hz.  
  • No moving parts
  • Switch mode design
  • Overload & short circuit protection
  • LED charging indicator
  • Convection cooling
  • Minimum 80% efficiency throughout full operating range
Operation

The charger has been designed to supply current to a battery until the battery terminal voltage is equal to the set float voltage. After this it will change to a trickle charge current. When the battery voltage falls, due to a load being applied and the battery being discharged, the charger will supply current to restore the voltage of the battery to the float voltage.
Important Notes

This product is now obsolete.  See 9250/9255 for the new alternatives.
Alternative /
Associated Products		 DSE9250 - 3.7 Amp 24 Volt Battery Charger
DSE9255 - 5 Amp 24 Volt Battery Charger