[ Skip Navigation ]

DSE Products

  • DSEPower
  • DSE850
  • Multi-Set Communications Hub and Software

  • Deep Sea Electronics DSE850 Multi-Set Communications Hub and Software has been designed to work with the DSEPower Series Load Share Control Modules (DSE5510, DSE5520, and DSE5560). The software is scheduled to be compatible with additional DSE controllers in the near future.

    The DSE850 Ethernet controller is connected to the internet and all DSE control modules that are on-site. The Ethernet controller requires a fixed internal IP address that can be configured to be visible over the internet. Once the IP address can be accessed over the internet then sites can be viewed from any internet connection in the world. The system has been designed to display information on a maximum of 16 gen-sets and 4 mains (utilities) or 24 gen-sets with no mains (utilities). The software is easy to set up and DSE controllers can easily be added to the system using the software’s intuitive ‘Add Controller’ page. The Ethernet device also includes RS232 and RS485 communications ports. The RS232 port is used if you are only connecting one control module and the RS485 port is used if you are connecting multiple modules. The data taken from the DSE controllers is refreshed every 1-11 seconds (dependent on connection speed).

  • Downloads
  • T (Translations)

Further Information

Main Features
  • Clear alarms & re-start generators
  • Multiple password levels (Read only, minor changes, full control) · 
  • Log into system from any web connection 
  • Multi or single set compatible
  • Easy to use graphical interface      
  • System overview screen with instant status indication of gen-sets        
  • Fully detailed controller screens 
  • User configurable data logging      
  • Logs can be downloaded to a local computer for importing data into spreadsheets
  • Alarms with multiple trigger levels
  • RS232 and RS485 communications ports      
  • Common screen layouts for ease of use    
  • E-mail support     
  • Remotely upgradeable firmware      
  • Controller communication log page    
  • Colour engine status indicators – Blue = At rest, Green = Running OK, Grey = Lost contact, Yellow = Warning alarm, Red = Shutdown   
  • Software can display site names on each page for easy identification
Benefits
  • View site status quickly and easily
  • System can send email notification in the event of a change in engine status, engine warning or engine shutdown to a defined email addresses
  • Alarms can be cleared and generators re-started (If no site maintenance is required)
  • Software can be used to identify trends in engine behaviour
  • Allows multiple sites to be monitored from one location (Each site needs its own IP address)
  • Full module control
  • Gives information for basic fault finding diagnosis before attending site
  • Can be used on an intranet site for monitoring internally
Alternative /
Associated Products		 DSE5510 - Auto Start Control Module (Electronic engine enabled)
DSE5520 - Auto Mains Failure & Instrumentation Control Module (Electronic engine enabled)
DSE5560 - Auto Transfer Switch & Mains Control Module
DSE7510 - Auto Start Control Module (Electronic Engine Enabled)
DSE7520 - Auto Mains (Utility) Failure & Instrumentation Control Module (Electronic Engine Enabled)
DSE7560 - Auto Transfer Switch & Mains (Utility) Control Module