[ Skip Navigation ]

DSE Products

  • Other Products
  • DSE530
  • Auto Transfer Switch Control Module

  • The DSE530 is a fully configurable Automatic Transfer Switch Control Module . It is designed to monitor the incoming AC mains supply (Single or three phase) for under/over voltage and under/over frequency.  Should these fall out of limits, the module will issue a start command to the generating set controller.  Once the set is available an output within limits, the ATS module will control the transfer devices and switch the load from the mains to the generating set.  Should the mains supply return to within limits the module will command a return to the mains supply and shut down the generator after a suitable cooling run.  Various starting sequences are used to prevent nuisance starting and supply breaks.

     

       

  • Downloads
  • T (Translations)

Further Information

Benefits
  • Two user configurable LED's are provided to allow the user to display specific states
  • Five user configurable relays are provided to allow control of contactors, different breaker types and engine control modules and alarm systems.
Operation

The four position keyswitch allows for mode selection:

  • Auto Mode
  • Auto Mode with Manual Return to Mains
  • Run Generator Off Load
  • Run Generator On Load
Alternative /
Associated Products		 DSE705 - Auto Transfer Switch Control Module
DSE4130 - Auto Transfer Switch Control Module