[ Skip Navigation ]

DSE Products

  • DSEUltra
  • DSE4410
  • Auto Start Control Module

  • PRE-RELEASE INFORMATION - FEATURES OF THIS UNIT COULD CHANGE PRIOR TO LAUNCH

    The DSE4410 is an Auto Start Control Module  for single gen-set applications. The module has been designed to work with electronic and non electronic engines providing advanced engine monitoring and protection features. 

    The module is available in magnetic pick-up and Canbus versions.   It includes a back-lit LCD display which clearly shows the status of the engine at all times. It monitors frequency, voltage, current, oil pressure, coolant temperature and fuel level. It has also been designed to display the warning and shutdown status of the engine.  

    The module includes six digital inputs and six outputs. Four outputs are configurable on the magnetic pick-up version and six are configurable on the Canbus version. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.  

  • Downloads
  • T (Translations)

Further Information

Main Features

 

 

 

 

 

  • PC and front panel configurable
  • CAN and magnetic pick-up versions
  • 6 digital inputs
  • 6 outputs (all six configurable on Canbus version, four configurable on magnetic pick-up version)
  • Event log (5)
  • 50/60Hz calibration setting
  • Configurable timers
  • Automatic shutdown or warning when fault conditions are detected
  • Manual & remote start
  • Engine pre-heat
  • Protected solid state outputs (PSS)
  • Advanced metering capability
  • Front panel mounting
  • Front panel programming
  • Engine hours counter
  • LED indicators
  • Back-Lit LCD display

     

     

     

     

     

    		•
    Benefits

     

     

     

     

  • Hours counter provides accurate information for monitoring and maintenance periods
  • User-friendly set-up and button layout
  • Multiple engine parameters are monitored simultaneously
  • module can be configured to suit individual applications
  • Wide range of engines can be specificed
  • IP65/NEMA 12 rating offers advanced resistance to water ingress (Gasket required)
  • License free PC software

     

     

     

     

    		•
    Operation

    The module is operated using the front STOP/RESET, AUTO and START push buttons.  Two additional push buttons next to the LCD screen are provided to scroll through the modules metering displays and to access the event log.
    Alternative /
    Associated Products    		 DSE4420 - Auto Mains (Utility) Failure Control Module