DSE Products

- View 1
Other Products
DSE402
Manual Start Control Module (Waterproof)
The DSE402 is a waterproof Manual Engine Control Module. The module is used to start and stop the engine, indicating any fault conditions, automatically shutting down the engine and indicating the engine failure by a steady red LED on the front panel.

Further Information

Benefits	The module includes inputs and multiple alarm channels.
Operation	The module is operated via a 3 position waterproof key switch with STOP, RUN and START positions. Turning the switch to the 'I' position will initiate a pre-heat relay for a 10 second period. Once the timer has expired the pre-heat relay will de-energise and the LED will extinguish. The FUEL relay will then energise and the safety on delay timer will commence. Turning the key to the 'II' positon will initiate the following sequence: Safety on delay alarm timer is activated Pre-heat relay is activiated Pre-heat timer is cancelled, if still running Fuel relay is activated, if not already active Starter relay is activated
Important Notes	IP Protection: Front = IP66D when installed in panel Rear = IP54
Alternative / Associated Products	DSE701 - Auto & Manual Start Control Module DSE702 - Auto & Manual Start Control Module DSE511 - Manual Start Control Module DSE512 (OBSOLETE) - Manual Start Control Module