DSE Product Range

The DSE701 is a Manual/Auto Start Control Module that offers an excellent range of engine monitoring and protection features.

The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input. It also has the capability to monitor battery charging by utilising the WL terminal on the charge alternator.  

When the module detects a fault condition it automatically shuts down the engine   The module also includes a remote start signal input. The input allows the module to be started from a pre-defined remote location.

The DSE702 is a Manual/Auto Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input. It also has the capability to monitor battery charging by utilising the WL terminal on the charge alternator.   When the module detects a fault condition it automatically shuts down the engine

The module also includes a tamper proof engine hours counter and a a remote start signal input. The input allows the module to be started from a pre-defined remote location.

The DSE703 is an Automatic Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor over speed, under speed, high engine temperature, low oil pressure, battery charge fail and fail to start.

The module also has two configurable auxiliary inputs and a configurable engine pre-heat timer. When the module detects a fault condition it automatically shuts down the engine, indicating the exact fault via LED.  

The module has also been designed to automatically start the engine within three attempts and crank disconnect.

The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed. When the module detects a fault condition it automatically shuts down the engine. The module also includes two user configurable auxiliary inputs.    The module has been designed to automatically start the generator when the mains (utility) power fails. As soon as mains (utility) power is restored the module has been designed to transfer the load back to the mains (utility) supply. The module then instructs the engine to begin the cool down procedure and stopping sequence (user configured).  

The DSE705 is an Auto Transfer Switch Control Module that has been designed to monitor the mains (utility) supply.    When the mains (utility) power fails the module sends a start request to the generator control unit. When the generator is up and running the module transfers the load across. When the mains (utility) returns the module transfers the load back and removes the start command. The generator should then begin it’s shutdown procedure.   The module can be configured so that they follow the users pre-set start and stop sequences.   

The DSE710 is an Automatic Start Control Module that offers an advanced range of engine monitoring and protection features. The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100 meters away.

The DSE720 is an Automatic Mains Failure Control Module that offers an advanced range of engine monitoring and protection features. The module has been designed to monitors a mains supply and switch over to the generator when the mains power fails.  The module monitors generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100 meters away.  

The DSE4110 is an Automatic Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor over speed, under speed, high engine temperature, low oil pressure, battery charge fail and fail to start.   The module also has two configurable auxiliary inputs and a configurable engine pre-heat timer. When the module detects a fault condition it automatically shuts down the engine, indicating the exact fault via LED.      The DSE4110 module also includes a tamper proof engine hours counter, engine exercise mode function and the enclosure has a closed back.  The module has been designed to automatically start the engine within three attempts and crank disconnect.

The DSE4120 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed. When the module detects a fault condition it automatically shuts down the engine. The module also includes two user configurable auxiliary inputs.    The module also includes a tamper proof engine hours counter, engine exercise mode function and the enclosure has a closed back.   The module havs been designed to automatically start the generator when the mains (utility) power fails. As soon as mains (utility) power is restored the module has been designed to transfer the load back to the mains (utility) supply. The module then instructs the engine to begin the cool down procedure and stopping sequence (user configured).

The DSE4130 is an Auto Transfer Switch Control Module that has been designed to monitor the mains (utility) supply.    When the mains (utility) power fails the module sends a start request to the generator control unit. When the generator is up and running the module transfers the load across. When the mains (utility) returns the module transfers the load back and removes the start command. The generator should then begin its shutdown procedure.   The module can be configured so that it follows the users pre-set start and stop sequences. The DSE4130 enclosure has a closed back.