DSE Product Range

The DSE9120 is a 7.3 Amp battery charger suitable for 12 Volt lead-acid batteries. 

The charger has been designed to be permanently connected to automotive batteries, keeping them charged to their maximum capacity. The chargers can also be used to supply a standing load that is attached to a battery. To improve reliability the chargers do not include any moving parts. The technology inside the chargers has been designed to avoid overcharging and overloading. The chargers will also continue to operate during cranking and running and have the ability to accept multiple AC voltage connections.

The DSE9240 is 3.5 Amp battery charger suitable for 24 Volt lead-acid batteries.

• Lightweight
• Compact design
• Can remain operational during engine cranking and running 
• Suitable for connection to a wide range of AC voltages between 100V and 240V, 50Hz or 60Hz.  
• No moving parts
• Switch mode design
• Overload & short circuit protection
• LED charging indicator
• Convection cooling
• Minimum 80% efficiency throughout full operating range

The DSE5103 is a 3 Amp 12/24 Volt Battery Charger.  It is designed to be permanently connected to automotive batteries, maintaining them in a fully charged condition without overcharging.  The charger is also capable of rapidly recharging batteries at a current up to the full rated output.  The charger may also be used to supply a standing load attached to the battery.  The charger output may be factory set to account for the standing load.

The charger is designed for reliability, ease of installation and accessibility during routine servicing.  It features radio frequency suppression and its smooth output linear mode design has a low voltage making the charger suitable for use with electronic equipment.

The DSE5105 is a 5 Amp 12/24 Volt Battery Charger.  It is designed to be permanently connected to automotive batteries, maintaining them in a fully charged condition without overcharging.  The charger is also capable of rapidly recharging batteries at a current up to the full rated output.  The charger may also be used to supply a standing load attached to the battery.  The charger output may be factory set to account for the standing load.

The charger is designed for reliability, ease of installation and accessibility during routine servicing.  It features radio frequency suppression and its smooth output linear mode design has a low voltage making the charger suitable for use with electronic equipment.

The 2 Amp Battery Charger has been designed to be permanently connected to batteries, keeping them charged to their maximum capacity. 

The charger can be either mounted via DIN Rail or to the Chassis, using the fixing holes that are built into the case.  The chargers stylish design includes an LED indicator on the front that shows when the charger is  in a normal or overload condition. 

To improve reliability the charger does not include any moving parts.  it will continue to operate during cranking and running.  The charger can also accept multiple AC voltage connections

The 5 Amp Battery Charger has been designed to be permanently connected to batteries, keeping them charged to their maximum capacity. 

The charger can be either mounted via DIN Rail or to the Chassis, using the fixing holes that are built into the case.  The chargers stylish design includes an LED indicator on the front that shows when the charger is  in a normal or overload condition. 

To improve reliability the charger does not include any moving parts.  it will continue to operate during cranking and running.  The charger can also accept multiple AC voltage connections

The 3.7 Amp Battery Charger has been designed to be permanently connected to batteries, keeping them charged to their maximum capacity. 

The charger can be either mounted via DIN Rail or to the Chassis, using the fixing holes that are built into the case.  The chargers stylish design includes an LED indicator on the front that shows when the charger is  in a normal or overload condition. 

To improve reliability the charger does not include any moving parts.  it will continue to operate during cranking and running.  The charger can also accept multiple AC voltage connections

The DSE5110 BC is a 10 Amp battery charger designed for permanent connection to automotive batteries, maintaining them in a fully charged condition without overcharging.  The charger is capable of rapidly recharging the batteries at a current up to the full rated output.  The charger may also be used to supply a standing load attached to the battery and output may be factory set to account for the standing load. 

The charger is designed for reliability, ease of installation and accessibility during routine servicing.