[ Skip Navigation ]

DSE News

  • DSE's new product brochure containg all the company's latest control solutions and additional services is now available to download from the website.

    Click on the following link to get your copy straight to your desktop.

    http://www.deepseaplc.com/product/brochure

     

  • DSE is delighted to announce the launch of its new look homepage, which has been created to make the website work even more effectively for its users.  The new look homepage has been launched alongside the company's brand new Product Brochure which is now available for download from the site by going to the following page. http://www.deepseaplc.com/product/brochure

    The new brochure features all the latest control modules as well as additional information on the company.

  • We are delighted to announce that we will be continuing to hold regular monthly training events at our head office in North Yorkshire, UK throughout 2009.  The initial dates that we have been running towards the back end of 2008 have all been fully booked and the feedback received from attendees has been extremely positive.  The dates below run up until the end of 2009. 

    The load share training courses will now include new content on the DSE75xxx Load Share Control Modules.

    The courses are as follows:

    Tuesday 13th January 2009 - Full Module Overview Training (FULLY BOOKED)

    Tuesday 10th February 2009 - Load Share Training (FULLY BOOKED)

    Tuesday 10th March 2009 - Full Module Overview Training (LIMITED AVAILABILITY REMAINING)

    Tuesday 14th April 2009 - Load Share Training

    Tuesday 12th May 2009 - Full Module Overview Training

    Tuesday 9th June 2009 - Load Share Training

    Tuesday 14th July 2009 - Full Module Overview Training

    Tuesday 11th August 2009 - Load Share Training

    Tuesday 8th September 2009 - Full Module Overview Training

    Tuesday 13th October 2009 - Load Share Training

    Tuesday 10th November 2009 - Full Module Overview Training

    Tuesday 8th December 2009 - Load Share Training

    All training events run 10am - 4pm.

    If you would like to register your place on one of these training events please contact us on  0044 (0) 1723 890099 and ask for Technical Support or email support@deepseaplc.com

    We look forward to seeing you on one of the above dates!

    • [ Read In Full ] GEARING UP FOR POWER-GEN INTERNATIONAL 2008
    • 2008-11-06 14:47:29

  • Deep Sea Electronics is currently putting the finishing touches to its preparations for Power-Gen International.  The world's largest power event is taking place between the 2nd and 4th December 2008 at the Orange County Convention Center, Orlando, USA.

    We will be promioting our brand new range of gen-set controls designed to meet a wide range of different applications across all levels.

    Find us at Booth #1431

    To find out more about the exhibition visit: http://pgi08.events.pennnet.com/fl//index.cfm

     

    • [ Read In Full ] DSES PAKISTAN DISTRIBUTOR HOLDS A ONE DAY SEMINAR IN KARACHI
    • 2008-09-23 17:59:45

  • DSE's Pakistan Distributor, Pyramid Automation, conducted a one-day seminar on DSE generator controls & communication systems at the Sheraton Hotel & Towers, Karachi, Pakistan.

     

    The seminar was designed to improve the knowledge of their existing customers so that they could utilise all the functions of DSE controllers to their full potential.  In addition, the seminar hoped to win Pyramid some new customers by demonstrating the ‘ease of use’ and high functionality of the DSE control range.

     

    The event proved to be a great success and was well received by a large number of attendees comprising of System Integrators, Engineers, Consultants and Generator OEM's.

     

    Key topics covered on the day included:

     

    1. Introduction to DSE controllers

    2. DSE-55xx Load Share & Synchronising Applications / Configuration

    3. Generator Synchronising Show - Presentation covering Soft Transfer on Mains Return

    4. Introduction to some key successfully executed projects by Pyramid Automation on Load Share Applications

    5. Parallel Operation & Synchronisation

    6. Remote Control & Monitoring of generators at DSE factory in UK (via Internet)

     

     

    Mr Shafique Ahmad from Pyramid Automation commented, “As a result of the seminar we have received a very positive response regarding Load Share Applications.

     

    Bank Alflah's data centres in Karachi and Lahore will be using DSE-55xx Load Share modules for soft transfer purposes and are now seriously considering the DSE850 Multi- Set Communications software for simple monitoring of their generators.  This will be a break-through for DSE850 applications in Pakistan.

     

    Panel builders are also undertaking load share projects on the basis of the high level technical support & commissioning services offered by Pyramid Automation.”

     

     

    For further information please contact Deep Sea Electronics plc: marketing@deepseaplc.com

    or for enquiries within Pakistan please contact Pyramid Automation: info@pyramidautomation.com.pk

     

  • Deep Sea Electronics is delighted to announce that it has launched its new Load Share Control Modules.  The 75xx Series has been created to be the successor of the 55xx Series and will incorporate additional features as well as maintaining all exisitng features and functionality. 

    The 75xx will utilise the same case design as the companys existing 72/73xx controllers and promises to deliver an outstanding collection of load sharing/synchronising control modules. 

    Full information on the control modules can be found within the products section of the website.

  • We have just launched our brand new download area, which we have created to make it easier and quicker for our web users to find the documentation/software they require on our range of control modules.

    We have replaced the old grid style layout with an intuitive page that presents only the files you need after asking you a few short questions.  This new layout gives us the flexibility to add new files and categories extremely easily without outgrowing our page design.

    If you have any questions at all about how the new page operates then please do not hesitate to contact us. 

  • We are delighted to announce that we will be holding regular monthly training events at our head office in North Yorkshire, UK .  The dates below run up until the end of this year.  The courses are as follows:

    Wednesday 10th September 2008 - Full Module Overview Training (NOW FULLY BOOKED)

    Tuesday 7th October 2008 - Load Share Training

    Tuesday 4th November 2008 - Full Module Overview Training (NOW FULLY BOOKED)

    Tuesday 2nd December 2008 - Load Share Training

    All training events run 10am - 4pm.

    If you would like to register your place on one of these training events please contact us on  0044 (0) 1723 890099 and ask for Technical Support or email support@deepseaplc.com

    we look forward to seeing you on one of the above dates!

    • [ Read In Full ] NEW BATTERY CHARGER ADDED TO DSE EXTRA RANGE
    • 2008-07-18 14:23:06

  • Deep Sea Electronics has added a 5 Amp 24 Volt charger to its new range of switch-mode battery chargers within the DSEExtra Series meaning there are now four different rated chargers to choose from..  The charger has been designed to fit within the same case design as the existing 5 Amp 12 Volt Charger and includes all the same advanced functionality.  The new charger will be called a DSE9255 and will be available to work with lead acid, nicad and other battery types.  The charger will be available to order from 01/08/08.

    Full product information will be added to the products section of the site shortly.

     

    • [ Read In Full ] DSE3110 MANUAL AND AUTO START - LAUNCH DATE 11TH AUGUST 2008
    • 2008-07-18 14:05:11

  • The company's latest addition to its next generation of contol modules is set for launch on the 11th August 2008.  The module promises to deliver outstanding features and advanced functionality in a compact module enclosure.  The module will work with electronic engines and will be available in two variants, magnetic pick-up and canbus.  Both modules will monitor engine speed, frequency, run hours and voltage.  There will be six digital inputs and 4 outputs as standard, a back-lit LCD display  and the ability to program the module using the DSE Configuration Suite PC Software.

    Full information on the DSE3110, including data sheet, and supporting documentation is now on the website.

    • [ Read In Full ] DSE ALL SET FOR LAUNCH OF NEW MULTI-SET COMMUNICATIONS SOFTWARE
    • 2008-07-02 10:26:56

  • Deep Sea Electronics is delighted to announce its DSE850 Multi-Set Communications Remote Monitoring and Control Software will be available from August 2008.  The software has been designed to work with the company’s load share controllers (DSE5510, DSE5520, DSE5560), with plans to make the software compatible with additional DSE controllers in the near future.

     

     

    How Does It Work?
    The DSE Ethernet controller is connected to the internet and all DSE control modules that are on-site. The Ethernet controller requires a fixed internal IP address that can be configured to be visible over the internet. Once the IP address can be accessed over the internet then sites can be viewed from any internet connection in the world. The system has been designed to display information on a maximum of 16 gen-sets and 4 mains (utilities) or 24 gen-sets with no mains (utilities). The software is easy to set up and DSE controllers can easily be added to the system using the software’s intuitive ‘Add Controller’ page. The Ethernet device also includes RS232 and RS485 communications ports.  The RS232 port is used if you are only connecting one control module and the RS485 port is used if you are connecting multiple modules. The data taken from the DSE controllers is refreshed every 1-11 seconds (dependent on connection speed).
    What Features Does It Include?
    ·         Clear alarms & re-start generators
    ·         Multiple password levels (Read only, minor changes, full control)
    ·         Log into system from any web connection
    ·         Multi or single set compatible
    ·         Easy to use graphical interface
    ·         System overview screen with instant status indication of gen-sets
    ·         Fully detailed controller screens
    ·         User configurable data logging
    ·         Logs can be downloaded to a local computer for importing data into spreadsheets
    ·         Alarms with multiple trigger levels
    ·         RS232 and RS485 communications ports
    ·         Common screen layouts for ease of use
    ·         Email support
    ·         Remotely upgradeable firmware
    ·         Controller communication log page
    ·         Colour engine status indicators – Blue = At rest, Green = Running OK, Grey = Lost contact, Yellow = Warning alarm, Red = Shutdown
    ·         Software can display site names on each page for easy identification
    What Benefits Does It Offer?
    • View site status quickly and easily
    • System can send email notification in the event of a change in engine status, engine warning or engine shutdown to a defined email addresses
    • Alarms can be cleared and generators re-started (If no site maintenance is required)
    • Software can be used to identify trends in engine behaviour
    • Allows multiple sites to be monitored from one location (Each site needs its own IP address)
    • Full module control
    • Gives information for basic fault finding diagnosis before attending site
    • Can be used on an intranet site for monitoring internally
    Java is required to run all features of the Multi-Set Comms software.
    • [ Read In Full ] DSE7000 SERIES ENHANCED WITH INDUSTRY LEADING FEATURES
    • 2008-05-06 15:26:03

  • Deep Sea Electronics is delighted to announce the addition of new industry leading features to the DSE7000 Series. All features are now available and units already in the field can be upgraded on-site to include these.  The new version of the software for this product is readily available to download from the download area of the website.

    New Features Include:

    KW Overload Protection - This feature allows the user to Set KW protection to their required level.  If KW goes above this preset level for a user defined amount of time, the module will trip the breaker and cool the engine down before it stops. 

    Auto Voltage Sensing/Alternative Configuration (DSE73xx Only) -  This feature removes the need to re-configure the module when moving a generating set from one site to another site with a different wiring topology. The module will automatically detect the changes to the alternator wiring topology and re-configure itself accordingly.

    Dual Mutual Standby - This feature is utilised in installations where two generators are installed to reduce the risk of failure.  The two generators can be configured to act as back up to each other in case of a failure, whilst also periodically transferring the load from generator to generator in order to balance the running hours.

    Phase Rotation - This feature prevents the generator from running if connected incorrectly.

    Earth Fault Trip (DSE73xx only) - In the event of an earth fault being detected the control module will protect the generating set and provide a controlled shutdown.

    Negative Phase Sequence (Unbalanced Load) - If the load is unbalanced the control module will prevent damage to the alternator by disconnecting the load and cooling the engine down before it stops.

    Edison Delta Topology (3 Phase 4 Wire) - This allows the user to configure the module to work with a different alternator configuration. The addition of Edison Delta wiring support is a reflection of the products flexibility within a truly global market.

    Water Heater Control - This feature is used to control engine heating devices when operating engines in cold climates.

    Water Cooler Control - This feature is used to control engine cooling devices when operating engines in warm climates. 

    Dual Function ‘Stop and Panel Lock’ Input Option - A digital input is provided to place the module in stop mode and lock the front panel so that it cannot be started. This feature could be utilised when maintenance work is being carried out.

     

  • DSE are delighted to announce the launch of thier latest collection of switch mode battery chargers.  The new collection is made up of three different sized chargers which are available to order now.

    About the Chargers: 

    The 2 Amp, 3.7 Amp and 5 Amp Battery Chargers have been designed to be permanently connected to batteries, keeping them charged to their maximum capacity.  The chargers can be either mounted via DIN Rail or to the Chassis, using the fixing holes that are built into the case. The chargers stylish design includes an LED indicator on the front that shows when the charger is in a normal or overload condition.  To improve reliability the chargers do not include any moving parts.  They will also continue to operate during cranking and running. The chargers can also accept multiple AC voltage connections.

     

     

    ADVANCED FEATURES

     

    Multi-Stage Intelligent Charging

    ·         Constant, maximum current during charge recovery phase

    ·         Chargers automatically return to float mode when charging is complete

    Low Output Ripple

    ·         Makes the chargers ideal for all battery types

    Full Protection

    ·         Reverse polarity protection, short circuit protection and current limiting

    Boost Mode

    ·         Boosts and equalises cell charge improving battery performance and life

    ·         Simple boost connection using on-board terminals

    Power Save Mode

    ·         Once the battery is fully charged the chargers switch to Eco-Power to save energy

     

    STANDARD FEATURES

    ·            Suitable for a wide range of battery types

    ·            No moving parts

    ·            Switched mode design

    ·            Charge fail output

    ·            Minimum 80% efficiency throughout full operating range

     

    Full information on the chargers can be found within the products section of the website and is also available to download from the site's download area.  The chargers will be on display at IPEE 2008 at the NEC in Birmingham 22nd-24th April 2008

    • [ Read In Full ] VISIT DEEP SEA AT IPEE 22ND-24TH APRIL 2008
    • 2008-01-21 12:33:22

  • Deep Sea Electronics is currently preparing for its second exhibition of 2008.  IPEE at the Birmingham NEC in the UK  promises to be a very exciting three days for the company.  The show will provide the company with another opportunity to promote the DSE7000 Series that was launched into the marketplace in January 2008.

    As well as the DSE7000 Series you will be able to view our extensive range of control modules including Load Sharing and DNV Certified modules.  We will also have our technical product staff on the stand so you will be able to discuss the full features and benefits of DSE's control range.

    You can find us in Hall 2 onStand B1.  We look forward to seeing you between the 22nd and 24th April 2008.

     

  • Following the successful launch of the DSE7000 Series at Power-Gen USA, the company can confirm that the modules within the series will be available to order from the 14th January 2008.

    For more information on each product within the series visit the products section on the website, or to get instant access to the Data Sheets go to the DSE Download section.

  • Deep Sea Electronics is delighted with the response to the launch of the DSE7000 Series and the number of people visiting the Booth has been outstanding. 

    Day 1 in full flow:

    • [ Read In Full ] DSE TO SHOWCASE ADDITIONAL NEW PRODUCTS AT POWER-GEN 07
    • 2007-12-04 11:39:01

  • As well as the launch of the new DSE7000 Series at the show in New Orleans in December, the company are to showcase an additional seven new products on the stand.

    The new collection of modules will be an excellent addtion to the successful range of DSE control solutions and will offer the end user a wide range of advanced features and benefits.

    Make sure you vist the Deep Sea Booth (#3729) to see these products for yourself, where we will be delighted to discuss them with you.

    • [ Read In Full ] VIST US AT BOOTH 3729 AT USA POWER-GEN 07
    • 2007-11-28 08:29:26

  • Deep Sea Electronics are exhibiting at this year's USA Power-Gen Show in New Orleans.  Make sure you visit the Booth (#3729) to see the brand new products that are now available.

    We look forward to meeting with you.

  • The launch of the DSE7000 Series has now taken place.  Power-Gen International in New Orleans is running for another 2 days so there is still plenty of time to see the best control modules the industry has ever seen.  The company is ready to take the industry by storm with its new gen-set control series.  More information on the DSE7000 Series is available on this site, see the products section.

    We look forward to meeting with you between the 11th and 13th December 2007 at the Ernest N. Morial Convention Center, New Orleans - Booth 3729.

  • On Monday 8th October 2007 Deep Sea Electronics Plc attended the annual ‘Yorkshire Business Insider Growth 100 Awards’, which celebrates the 100 fastest growing companies across the region.
     
    As well as celebrating the top 100’s achievements over the last year, special recognition awards were presented to the most dynamic and high achieving companies in the region.
     
    We are delighted to say that the company was presented with two awards. 
     
    The ‘International Award’ and the ‘Gold Medal Award’.
     
    The first award was in recognition of the company’s outstanding export business, which the company was delighted to win against some tough opposition.
     
    The second award was to identify the best business in the region over the last year. An independent panel of expert judges evaluated every company within the top 100 to find one company that excelled in all aspects of its business over the last 12 months. 
     
    The company was delighted to have been presented with this award and be officially crowned ‘The Best Business in Yorkshire 2007’.
     
     
    David Thomson, Sales & Marketing Director commented:
     

    ‘Receiving these two awards is a fantastic achievement for us. We have been working extremely hard over the last few years to expand our overseas markets, receiving this award for our export business shows how much we have achieved during this time. To receive the overall ‘Best Business Award’ is a real testament to the hard work of all the staff throughout the company. We are delighted to be recognised as Yorkshire’s number one company for 2007’.

    Image below shows James Maynard,  Marketing Manager collecting the Gold Medal Award on behalf of the company.

    • [ Read In Full ] LOAD SHARING FOR MARINE APPLICATIONS - AVAILABLE NOW
    • 2007-09-26 12:53:47

  • We are delighted to add to our range of DNV approved modules for use within marine applications.  Following on from the success of the DSE5310M for single-set applications, we are now able to offer the DSE5510M for multiple set control.

    The module can be found within the products section of our site, where you can find out about all the features that it can offer.  The DSE Downloads area also includes all supporting information for the product which can be downloaded quickly and easily.

     

     

    • [ Read In Full ] DSE ADVISES MAJOR UK AIRPORT ON GENERATOR UPGRADES
    • 2007-08-30 09:10:51
  • Power back-up systems at Leeds Bradford International Airport (LBIA) required upgrading in 2007 and Rollo UK (Leeds) were commissioned to carry out a site survey and design the upgraded system, utilising existing generator sets. 

    Rollo engineers required Deep Sea Electronics expertise on site to help with the survey and give technical application advice, and one of DSE's specialist, Support Engineer's attended.

     

    LBIA currently have 5 generators fitted with DSE 509 modules operating emergency power for the main runway and approach lights, fire station and terminal buildings.  Site engineers needed the ability to carry out routine maintenance work on any of the generators without losing the emergency power supply.  This was particularly vital for the runway lighting as two gensets are used on a regular basis, as a precautionary safety measure, in times of bad weather when there is a higher chance of mains failure. This is a requirement of CAT III runway regulations.

    It was decided therefore, to introduce a new mobile genset which could be simply plugged in when any of the existing sets were not available; for example during routine maintenance.  This meant that temporary loss of emergency power would no longer be an issue and aided regulation compliance.
     
    The existing gensets are due to be refurbished and fitted with new DSE5320 Auto Mains Failure modules, which were chosen because of the functionality, support for the CAT III specification and for  their compatibility with a wide range of engine types, including electronic engines.
     
    The site survey was completed in June 2007 and the project will be completed later in the year.
  •  
    A DSE customer training event was organised in August 2007 for Site Technology Ltd. at the customer’s premises in central Abu Dhabi, UAE.
     
    Site Technology is a long established company specialising in all aspects of site management including integrated security, power, traffic and safety systems. 
     
    The Company, which is highly respected throughout the Emirates, has been using DSE control modules for many years but wanted to enhance their knowledge through DSE’s specialist training.
     
    Tony Manton, DSE’s Customer Support Engineer, travelled to site to meet 9 of the customer’s top engineers from the Power Division. Taking part in the 2-day training experience, they covered all aspects of the DSEPower® and DSEControl® Series, which included recommendations for a number of different typical applications. In-depth question and answer sessions also enabled the engineers to cover technical topics relating to potential future projects which included load sharing and AMF solutions.
     
    Mr Ayman Hegab, Service Manager for Diesel Generators at Site Technology Ltd., was delighted with the training course and believed it had proved a massive benefit for all his engineers.
     
    This successful event was the latest of a series of training seminars undertaken by DSE’s Customer Support team who have, during 2007, also visited Greece, Russia, Cuba, Egypt, Brazil, Qatar, Ireland, Mexico, Peru, USA, Turkey and many sites throughout the UK.
     
    For further information on training, please contact: marketing@deepseaplc.com
     

    The picture shows Site Technology's Board room where the training event took place.

  • The company is delighted to be on the road with ABB, the global leader in power and automation technologies. ABB specialise in enabling utility and industry customers to improve their performance at the same time as lowering their environmental impact.


    ABB are currently travelling around North America with their training road show truck, which includes a DSE5310 to control the generator that is on-board.


    Image shows the truck on the way to its next training destination. 
     

    More information will follow soon…

  • The company has just finished assisting PowerOhm with the installation of a two set load sharing system in County Cork, Eire. The installation signalled the end of a highly in-depth project that the company had been involved with from the early stages. 
     
    The site owned by Centocor Inc a subsidiary of Johnson & Johnson has been developed to concentrate on developing products for the detection and treatment of a wide number of human diseases.
     
    The site consists of two sets that have been installed to provide mains back-up and no break return. Each set has a DSE5510 that is controlled by a DSE5560 to back-up one of two loads. The sets have been designed to run independently of each other and only parallel with the mains supply. 
     
    Image below shows one of the Gensets on site.
     
     
     
     
    Centocor Inc only allowed a two hour window to finalise the commissioning of the two sets. Due to the high profile nature of the site it was important that the commissioning was finished during this period. Working closely with PowerOhm during the two hour window enabled the site to be set-up and left in full working condition.
     
    Before the company left site, testing of the parallel operation, island mode and no break return were all successfully tested. As a result the end users were extremely pleased that their site was fully operational. It was also an excellent opportunity for the company to increase PowerOhm’s knowledge of load sharing and all the features within the DSEPower® Series.
     

    Image below shows Centocor’s Irish Site.

  • The company has just successfully supplied its products for installation at the Halley VI Research Station in Antarctica. 
     
    Westac Power Ltd have built and tested four generating sets for the research station. The units have been designed in a unique power and heat configuration, where the generator engine not only provides the station with power but makes use of the waste heat to warm the buildings and also melt snow to provide fresh water.
     
    The DSE controllers in use are the DSE5510 control modules, part of the DSEPower® Series. The DSE5510’s were chosen because of their load sharing capability, allowing all machines to be used to provide a common power supply for the entire station.
     
    The site has four DSE5510’s working together, which control the output of each unit depending on the power and heat requirements. The intelligence of the control modules ensures that each unit is constantly working to its optimum output level.
     
    The site also uses a DSE820 Interface Module so that all four DSE5510’s and units can be monitored remotely via the internet. This provides the user with peace of mind, as they can see that the site is operating at the correct levels from any remote location where internet access is available.
     
    David Thomson, Sales & Marketing Director commented:
     
    ‘We are delighted to be involved with this project. It is fantastic that our controllers are going to be providing load share functionality within such an extreme environment. We designed the DSEPower® range of load share modules to offer the user outstanding features combined with simple, user-friendly set up and operating functions. We hope to work with Westac on many more projects of this kind in the future’.

     

    Picture shows how the Halley VI Research Station will look upon completion:

  • The company has just finished exhibiting at Power-Gen Madrid. The exhibition which was running for three days between the 26th and 28th June enabled the company to promote two of its new product ranges. 
     
    The DSEMarine® series attracted a huge amount of interest from existing and potential new customers. Many companies were pleased to see that the company was now able to supply its high quality products for use on-board vessels. The DSE7000 Series, which promises to be the most technically advanced and user-friendly control solution the market has ever seen received exceptional feedback on its look, feel and functionality.
     
    The company was also pleased with the positive feedback received on the new brand image. The company’s next exhibition will be at Power-Gen International in New Orleans, America between the 11th and 13th December 2007. We look forward to seeing you there.
     
     Please see image of the stand below:

     

     

     

  • The company is delighted with the response it has received from the industry on the rebranding exercise it has just carried out.  Comments have been sent from all corners of the world congratulating the company on its new corporate identity. 

    David Thomson, Sales & Marketing Director commented:

    'We are extremely pleased with the response we have had from the industry on our new corporate identity.  We were confident that the new brand would have a positive impact but could not have anticipated the amount of positive feedback we have actually received.  It is now important that we continually build on the brand to remain at the front of everyone’s minds'.

  • We are exhibiting at Powergen Europe from 26th to 28th June 2007, where we will be launching two exciting new product ranges, the DSE7000 Series, taking gen-set control to a whole new level and the DSEMarine® Series,taking DSE controls to a wider audience.

    What does the DSE7000 Series offer?

    • Improved user interface
    • Increased inputs and outputs
    • Significantly enhanced feature list
    • Designed specifically for the Power Generation Industry
    • Electronic engine compatibility
    • Plus much more

    What does the DSEMarine® Series offer

    • Full DNV certification
    • Electronic engine compatibility
    • Muti-set load sharing
    • Remote control and monitoring
    • Plus much more

    We are extremely excited about these two new product ranges, the DSEMarine® Series includes a wide range of features and allows us to take the recognised quality of DSE into a new market area.

    The DSE7000 Series will be the most advanced collection of modules the market has ever seen. The benefits that the product range offers will make your trip to Madrid extremely worthwhile.

    We would be delighted if you could join us in Madrid on Stand E79 to see for yourself the product that is going to be the talk of the industry for many years to come!

    Powergen Europe
    Hall 10, Feria de Madrid
    Madrid, Spain
    26th – 28th June 2007
    Stand number E79

    • [ Read In Full ] DEEP SEA ELECTRONICS PLC LAUNCHES NEW CORPORATE IDENTITY
    • 2007-05-24 17:38:16

  • Deep Sea Electronics Plc is delighted to announce that it has undergone a full strategic re-branding exercise and from the 30th May 2007 the company will be represented by a new logo and supporting materials.

    The company which has been at the forefront of the power generation industry for over 30 years has created a new brand that will further strengthen the DSE name across the world and will move forward with the company for many years to come. The company has created a new strap line ‘Complex Solutions Made Simple’ which promotes the company’s design process of making complicated solutions as simple for the end user to operate as possible.

    The company has worked hard to create a range of new materials that deliver information to the customer in a clear and concise manner. The company are confident that their new materials will become recognised as the best within the industry.

    DSE’s Sales & Marketing Director Mr David Thomson commented:

    ‘The company has been the leading control solutions provider within the power generation industry for many years. We decided that to complement our advanced range of control solutions we needed to develop a brand image that reflected our position as market leaders. We feel that the new brand achieves this and gives us an extremely powerful tool to continue our growth over the coming years.

    To coincide with the re-brand the company has also completely re-designed their corporate website to mirror the new identity. The site will play an extremely important role for the company acting as the ultimate resource for the company’s products and services.

  • Deep Sea Electronics plc has begun development of phase 3 of their prestigious North Yorkshire design and manufacturing facility. This phase involves building a large, two-story  warehouse and offices within the grounds of the existing site. 
     
    The additional space has become essential as DSE continues to see increasing sales across the globe, and while many companies have turned to cheaper manufacturing locations such as the Far East or India, DSE maintains it’s quality edge by further investment in the UK.
     
    The new facility, which will be operational by July, will provide the Company with an additional 14,500 square feet and will provide much needed space for the growing as well as additional warehousing and storage.
     
    Mr Eddie Sheader, Managing Director, said “We moved to this site in 2001 because it gave us the space necessary for our forecasted growth. We are looking forward to the completion of Phase 3 which will allow us to develop further.”