[ Skip Navigation ]

DSE News

  • DSE has just released an important software tool for remote monitoring of load share systems.

     

    The DSE8005 SCADA Suite software for Windows PC enables remote control and monitoring of DSE load share systems currently comprising of DSE86xx modules.

     

    Compatible with WIndows 7, XP and Vista, the software can be easily installed into any laptop or PC, allowing full remote control and monitoring facilities. The Windows based software is licence-free and user-friendly.

     

    FULL ON-SCREEN FUNCTIONALITY

    - Touch screen PC enabled

    - Engine start/stop

    - Monitoring and control

    - Switching on and off load

    - Load demand priority

    - Mains (Utility) base load power levels

    - 32/64-bit operating system

     

    For further information please refer to the DSE8005 Data Sheet or product manual.

  • New Paralleling Product Released….

     

    DSE has launched two new products for genset paralleling control.  The DSE8700 Rear Mounted Controller works with the DSE8721 Colour Remote Display Unit to give a comprehensive range of gen-gen parallel control with extensive remote display features.

     

    The DSE8710 is an easy-to-use, rear-mounted, multi-generator system, designed to synchronise up to 32 generators including electronic and non-electronic engines.  The front display screen is connected via a data link up to a maximum distance of 1km away, and offers comprehensive large screen graphs, charts, metering, power display and engine status information in a clear image and text format.

     

    The DSE8710 monitors the engine and indicates operational status, automatically starting or stopping the engine on load demand or fault condition. Failures are annunciated on the DSE8721, by illuminated LEDs and audible sounder.  Multiple language options are available. The event log will record 250 events to facilitate easy maintenance.

     

    An extensive number of fixed and flexible monitoring, metering and protection features are included as well as sophisticated communication and system expansion options. Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports able to be active at the same time, the new products are ideal for a wide variety of demanding paralleling applications.

     

    Main features include:

     

    – Sequential set start

    – Manual voltage/frequency adjustment

    – ROCOF and vector shift

    – Generator load demand

    – Automatic hours run balancing

    – Dead bus sensing

    – Bus failure detection

    – Direct governor and AVR connections/controls

    – Volts and frequency matching

    – kW and kVAr load sharing

  • Cape Town's 68,000 seater 2010 World Cup Stadium is "Perfect", FIFA general secretary Jerome Valcke said.  He was speaking to journalists at the stadium during a whistle-stop 'state of readiness' tour of South Africa's World Cup 2010 venues.

    To find out how DSE are involved in this prestigeous project, please select 'Case Studies' from within our DSE Profile title within our header bar.

  • DSE is delighted to announce the addition of an on-line video training area to its website.  DSE Interactive is a free training resource available to all website members.

    Once you are signed in to your Deep Sea web account the 'DSE Interactive' text will appear in the main header bar at the top of the site. 

    Please take some time to familiarise yourself with this new resource which we will be regularly updating with new information.

    If you are not already a website member you can easily submit a form to get your username and password, just click on the following link to go to the sign up form.

    http://www.deepseaplc.com/member/register

    • [ Read In Full ] DSE TO SHOWCASE NEW SYNCHRONISING CONTROL MODULES AT MEE 10 IN DUBAI
    • 2009-12-14 11:45:53

  • Middle East Electricity

    Date: February 9th to 11th

    Venue: Dubai International Exhibition Centre, UAE

    Please join us on Stand 2F20 within Hall 2 to see the very latest products we have to offer.  This show will see us promoting our new single and two part synchronising control modules.  Do not miss the opportunity to visit us and learn more about what our new modules can offer your business.   

  • Deep Sea Electronics plc are launching a new range of products which will form part of the DSEULTRA group of products.

    The DSE6010 is an Automatic Start Moduleand the DSE6020 is an Automatic Mains (utility) Failure Module.  Both modules are for single genset application and are suitable for use with electronic or non-electronic engines.

    The modules offer an icon display on the front panel and an advanced number of outputs and inputs making the modules flexible to suit a wide variety of application demands.

    For further information please contact our Sales or Technical Support Departments.

  • We are delighted to announce that we will be continuing to hold regular monthly training events at our head office in North Yorkshire, UK throughout  the last quarter of 2009 and the whole of 2010.  The initial dates that we have been running this year have all been fully booked and the feedback received from attendees has been extremely positive.  The dates below run up until the end of 2010. 

    We will be running 2 different training courses, a full module overview course and a synchronising and load sharing course.  Each course will run alternate months.

    See below for the dates the courses are running:

    The courses are as follows:

    Full Module Overview Training

    Tuesday 8th September 2009 - FULLY BOOKED

    Tuesday 10th November 2009- FULLY BOOKED

    Tuesday 12th January 2010- FULLY BOOKED

    Tuesday 9th March 2010- FULLY BOOKED

    Tuesday 11th May 2010- FULLY BOOKED

    Tuesday 13th July 2010- FULLY BOOKED

    Tuesday 14th September 2010

    Tuesday 9th November 2010

    Synchronising & Load Share Training

    Tuesday 13th October 2009 - FULLY BOOKED

    Tuesday 8th December 2009 - FULLY BOOKED

    Tuesday 9th February 2010- FULLY BOOKED

    Tuesday 13th April 2010- FULLY BOOKED

    Tuesday 8th June 2010- FULLY BOOKED

    Tuesday 10th August 2010 - FULLY BOOKED

    Tuesday 12th October 2010

    Tuesday 14th December 2010 

    All training events run 10am - 4pm.

    If you would like to register your place on one of these training events please contact us on  0044 (0) 1723 890099 and ask for Technical Support or email support@deepseaplc.com

    We look forward to seeing you on one of the above dates!

    • [ Read In Full ] DSE LAUNCH NEW AUTO TRANSFER SWITCH CONTROLLER
    • 2009-07-28 11:32:29

  • DSE's new Auto Transfer Switch Controller is now available. The DSE332 provides a wide range of features and benefits and has been developed to incorporate the key features required in ATS control.

    Key Features Include:

    • Supports multiple topologies
    • Automatic switchover to generator
    • Check sync feature
    • Real time clock
    • Ten configurable inputs
    • Five configurable outputs
    • Event log showing the most recent 10 events
    • Configurable timers
    • Automatic shutdown or warning when fault conditions are detected
    • Protected solid state outputs (PSS)
    • PC programming
    • Front panel programming
    • LED indicators
    • Text LCD display
    • External mains (utility) or genset failure inputs
    • Auto start inhibit
    • Load inhibit
    • Manual restore to mains (utility)

    For full information on the DSE332 controller please click on the following link: http://www.deepseaplc.com/product/view/dse332

    There is also a DC Power Supply that is compatible for use with the DSE332.  For further information on the DSE160 please click on the following link: http://www.deepseaplc.com/product/view/dse160

    This product is available to order now!

    • [ Read In Full ] DSE DISTRIBUTOR HAS MOTORBIKE SUCCESS IN SOUTH AFRICAN RACE
    • 2009-07-22 10:24:50

  • South African DSE Distributor, Graham Mephius and his wife Belinda of Hagar Marketing, enjoy the thrills of motorbike racing when they are not working.  The husband and wife team have enjoyed the sport for many years and Graham has been entering competitive races since 1995

     

    Graham’s latest race bike is a Kawasaki ZX10R furnished with DSE branding and Belinda rides a BMW 650 GS  (and Graham’s ZX10R).  An inventive way of raising the profile of DSE/Hagar throughout the South African market.

     

    In their latest bike Economy Run Graham came 8th overall on a Suzuki GSX650F that was sponsored by Suzuki SA, and Belinda was positioned 4th overall (3rd in class)on a Kawasaki ER650F sponsored by Hagar Marketing  – so a resounding success for the Hagar team and congratulations all round!

     

    • [ Read In Full ] FURTHER ENHANCEMENTS FOR THE DSE7000 SERIES
    • 2009-04-28 17:32:50

  • Deep Sea Electronics plc (DSE) has added a range of new features to the DSE7210/20 and DSE7310/20 control modules.  Through DSEs program of continuous product development, the enhanced features have added expanded control logic, enabling OEMs to reduce installation costs and increase system performance.

     

    Improvements to functionality of the DSE7000 Series will benefit hire set companies and OEMs, through enhanced monitoring and alarm facilities for superior and efficient maintenance management.  New performance features have also been added to meet some of the most demanding, modern, application requirements.

     

    The new features add to the already successful performance of the DSE7000 Series and make the modules feature rich in comparison to other gen-set controllers in its category.  The new features incorporate a wide selection of installation and end user benefits which include:

     

    • True dual mutual standby functionality with load balancing timer for complete system back-up and reduced engine stress (DSE7310 only)
    • Expanded load shedding and dummy load control for improved system capabilities      
    • Fan control for additional cooling and preventative maintenance       
    • ‘Protections Disabled’ facility - module will continue running when shutdown or electrical trip alarms are detected.  Ideal for fire pump applications etc. where a ‘run to destruction’ facility is essential.
    • Fuel usage monitoring and low fuel alarm (including alarm delay) for efficient fuel management
    • 3 separate maintenance alarms with programmable intervals and user configurable messages.  Includes an automatic shutdown facility.
    • Easy access to manual fuel pump control from the front panel     
    • Support for up to 3 remote display modules     
    • User defined sender curves can be saved with sender name 
    • Easy recalibration of flexible sender               
    • Expanded range for oil sender open circuit             
    • Sender inputs on DSE2130 expansion module can be configured as digital inputs allowing even greater system flexibility  
    • Enhanced event log with user configurable selection (100 events on 7210/20, 250 on 7310/20) allows in-depth engine diagnostics
    • Charge alternator fail warning and shutdown alarms with user programmable delay       
    • Independent earth fault trip CT ratio 
    • Expanded internal control logic allows user configurable output options reducing the need for external relays
    • Sleep mode – module can be configured to enter low power mode after a 5 minute delay, to save on battery power          
    • Manual speed trim – In manual mode, user can adjust engine speed (only on CAN engines that support this feature)              
    • RS232 settings and diagnostics -  additional display screens to help with modem diagnostics (DSE7310/20 only)
    • Easy access diagnostics - Configurable SCADA page shows a summary of output states    
    • Security levels – PC software has password system to control access and prevent unauthorised changes
    • Variant identification via SCADA                        
    • [ Read In Full ] DSE CHAIRMAN RECOGNISED FOR OUTSTANDING CONTRIBUTION TO AMPS
    • 2009-04-06 10:41:03

  • Mr Stan Archer, Chairman of Deep Sea Electronics plc, was recently recognised for his outstanding lifetime contribution to AMPS, the trade Association for Manufacturers of Power Generating Systems.

     

    Mr. Archer has represented  Deep Sea Electronics plc at the association for nearly 30 years, has sat on the Council and has been on the technical Committee since its inauguration.  He has provided a vital link during this time by attending British Standards meetings and looking at industry directives to see how changes may affect AMPS members.  As a result of this work he has written Technical Guides and articles advising  members on a wide variety of technical matters.

     

    The certificate was presented to Mr. Archer at the AMPS AGM in London in March.

  • New Products to enhance the DSE7310/DSE7320

     

    DSE have introduced a new range of remote display modules to enhance the application possibilities of the highly successful DSE73xx Control Modules.

     

    The DSE2510 and DSE2520 have been designed to offer remote control and display possibilities for the DSE7310 Auto Start and DSE7320 Auto Mains (Utility) Failure systems.

     

    A maximum of three remote devices can be linked to one system with the host control module up to 1km away.  The devices offer exactly the same instrumentation, control and monitoring capabilities as the host control module, including starting and stopping of the engine.

     

    This offers operation and maintenance crews a greater degree of versatility giving direct access to the system from up to 3 individual site locations.

     

    All remote devices in the system will display the same information at the same time, while the host controller is able to work independently, showing a different set of information.

     

    The modules are simple to operate and feature the same user-friendly menu layout as the host module.   

     

    OPERATION

     

    All communications and programming are done via the host module only.  The remote devices simply mirror the programming of the host module making the system quick and easy to install.

    The remote modules are operated via the START, STOP, AUTO and MANUAL soft-touch membrane buttons on the front panel. The DSE2520 also has a TEST button. Both versions include load switch buttons. The main menu system is accessed using the five navigation buttons to the left of the LCD display.

     

    Modules are available to order immediately.

  • The end location of a genset is often not a perfect environment.  Sets are expected to operate in tough environmental conditions that require high performance and reliability, despite their tough setting.  Whilst the mechanics of the engine and alternator are one thing, the generators cannot operate without a reliable control system.  Modern electronic controllers that are on the market today offer sophisticated functionality, but can they withstand the continued presence of vibration and dust, or other environmental challenges?

     

    In a recent project for Bremat Holland BV, Deep Sea Electronics (DSE) was the chosen generator control module for its fleet of mobile floor screed mixer and pump units.  The lorries are equipped with a container-unit  (divided into sand and cement compartments), a mixer, compressor, pump and generator.   The lorries are loaded and arrive on site where the sand and cement are automatically mixed together with water, and then pumped out.   Operation of the equipment is entirely reliant on power provided by an on-board 19KVA diesel generator with John Deere engine, fitted with a DSECONTROL® Series Auto Start controller.

     

     

    The high cost of putting one of these floor screed vehicles on the road is offset by the efficiency of the system, so for Bremat, the choice of gen-set controller was very carefully made.  The lorries can travel many miles to a site location and the implication of delays caused by malfunctioning equipment can be extremely costly as well as inconvenient: Delays can result in major building projects falling behind schedule incurring possible financial penalties; High costs are associated with sending engineers to site to rectify problems;  ‘Downtime’ of the lorry itself creates inefficiency.  It is essential therefore for Bremat to have the most reliable on-board systems to protect against unplanned breakdowns.

     

    DSE systems are protected against damage caused by the ingress of water and dust which may be present as a result of the normal screed mixing process. The modules carry an IP rating of 65 (NEMA 12) when fitted with the gasket, which shows the high level of protection afforded by these units.  In addition, they meet stringent environmental standards for vibration which, in this application, comes from two different sources: normal vibration associated with long and short haul transportation (lorries are constantly on the move) and vibration from the close proximity of the controller to the gen-set.  In all of the above cases, conditions are present on a regular and long-term basis, so the manufacturing process of the electronic controllers has to be high quality to maintain performance over the life-time of system.  Other environmental protections cover EMC, Electrical Safety, Shock, Humidity and Temperature, ensuring that wherever the destination of the lorry, the system will be fully protected from all sources of potential interference.

     

    As well as the reliability factor, Bremat also requires a system that offers the right combination of features incorporating easy operator functionality with sophisticated engine monitoring and protection facilities.

     

    Bremat is highly regarded throughout Holland and Europe and are market leaders in their industry.  Their reputation has been built over 40 years and they maintain this position by continuing to provide customers with innovative products of the highest quality.  Bremat have used DSE controllers since 1999.  They switched from using the DSE560 module to the DSE7210 Auto Start controller in January 2008 because of their successful history with the older module, and because the newer system offered higher functionality without compromising reliability.  These particular 7210s have now been in constant use for just over one year and continue to provide a faultless service, supporting Bremat’s excellent reputation throughout its national and international network.

     

     

     

    The DSE7210 offers a comprehensive range of user-friendly features including:

     

    •          Compatible with electronic and non-electronic engines

    •          Backed up real time clock

    •          Clear LCD display 132 x 64 pixels

    •          Changeable display languages

    •          Programmable event logging (100 events) showing time and date

    •          USB connectivity

    •          Robust module enclosure

    •          Five-key menu navigation

    •          Durable soft touch membrane buttons

    •          Fully configurable via PC software

    •          Front panel editor

    •          Engine exercise mode

    •          LED and LCD alarm indication

    •          Configurable start & fuel outputs

    •          kWh monitoring

    •          Automatic load transfer

    •          Configurable inputs and outputs

    •          Configurable timers and alarms

    •          Magnetic pick-up

    •          Power save mode

    •          PIN protected programming

    •          Manual fuel pump control

    •          Manual speed control

    •          Alternative configuration

    •          Scheduler

    •          Maintenance alarms

    •          Customisable status screens

    •          IP 65 (NEMA 12)

    •          Plus many more

     

     

     For further information please contact: marketing@deepseaplc.com  

    • [ Read In Full ] ANOTHER TWO SINGLE-SET CONTROLLERS ADDED TO PRODUCT RANGE
    • 2009-03-06 12:12:23

  • Deep Sea Electronics has launched 2 new single-set control modules.  The DSE44xx range includes an Auto Start and Auto Mains (Utility) Failure Controller.  Stardard features of the unit include:

    • Six digital inputs
    • One analogue input
    • Six outputs
    • Event log
    • LCD Text display
    • Engine hours counter
    • CAN and magnetic pick-up versions

    The modules monitor speed, frequency, voltage, oil pressure, coolant tempaerature and fuel level.

    The modules are available to order now.  Full information on the products and their relevant supporting materials can be found on our website at the following links.

    http://www.deepseaplc.com/product/view/dse4410

    http://www.deepseaplc.com/product/view/dse4420

  • Deep Sea Electronics has launched 2 new single-set control modules.  The DSE61xx range includes an Auto Start and Auto Mains (Utility) Failure Controller.  Stardard features of the unit include:

    • Six digital inputs
    • Three analogue inputs
    • Six outputs
    • Three-phase generator and mains voltage monitoring
    • Event log
    • Text display
    • Engine hours counter
    • CAN and magnetic pick-up versions

    The modules monitor speed, frequency, voltage, current, oil pressure, coolant tempaerature and fuel level.

    The modules are available to order now.  Full information on the products and its relevant supporting materials can be found on our website at the following links.

    http://www.deepseaplc.com/product/view/dse6110

    http://www.deepseaplc.com/product/view/dse6120

    • [ Read In Full ] VERSION 10 OF THE 5XXX PC SOFTWARE HAS BEEN RELEASED
    • 2008-12-17 17:15:52

  • Version 10 of the 5xxx PC Software has just been released and is available for download now.  The 5xxx download includes the software for the 51xx/52xx/53xx and 55xx control modules.  The new version includes enhancements for the 55xx control modules.  These enhancements are:

    1) Generator voltage and frequency can be adjusted from the running subset editor (run in manual with the generator breaker open).

    2) New KW overload alarms have been added

    3) Bus voltage and frequency can be adjusted from the running subset editor (run in manual with bus breaker open with at least one genset on the bus and controllable from the 5560) Applies to 5560 controller only.

    Version 10 of the Link 5000 Plus communications software for use with the 55xx control modules is now also available for download from the website.  This has been updated to work with Version 10 of the 5xxx PC software.

    • [ Read In Full ] DSES PAKISTAN DISTRIBUTOR HOLDS A ONE DAY SEMINAR IN KARACHI
    • 2008-09-23 17:59:45

  • DSE's Pakistan Distributor, Pyramid Automation, conducted a one-day seminar on DSE generator controls & communication systems at the Sheraton Hotel & Towers, Karachi, Pakistan.

     

    The seminar was designed to improve the knowledge of their existing customers so that they could utilise all the functions of DSE controllers to their full potential.  In addition, the seminar hoped to win Pyramid some new customers by demonstrating the ‘ease of use’ and high functionality of the DSE control range.

     

    The event proved to be a great success and was well received by a large number of attendees comprising of System Integrators, Engineers, Consultants and Generator OEM's.

     

    Key topics covered on the day included:

     

    1. Introduction to DSE controllers

    2. DSE-55xx Load Share & Synchronising Applications / Configuration

    3. Generator Synchronising Show - Presentation covering Soft Transfer on Mains Return

    4. Introduction to some key successfully executed projects by Pyramid Automation on Load Share Applications

    5. Parallel Operation & Synchronisation

    6. Remote Control & Monitoring of generators at DSE factory in UK (via Internet)

     

     

    Mr Shafique Ahmad from Pyramid Automation commented, “As a result of the seminar we have received a very positive response regarding Load Share Applications.

     

    Bank Alflah's data centres in Karachi and Lahore will be using DSE-55xx Load Share modules for soft transfer purposes and are now seriously considering the DSE850 Multi- Set Communications software for simple monitoring of their generators.  This will be a break-through for DSE850 applications in Pakistan.

     

    Panel builders are also undertaking load share projects on the basis of the high level technical support & commissioning services offered by Pyramid Automation.”

     

     

    For further information please contact Deep Sea Electronics plc: marketing@deepseaplc.com

    or for enquiries within Pakistan please contact Pyramid Automation: info@pyramidautomation.com.pk

     

  • Deep Sea Electronics is delighted to announce that it has launched its new Load Share Control Modules.  The 75xx Series has been created to be the successor of the 55xx Series and will incorporate additional features as well as maintaining all exisitng features and functionality. 

    The 75xx will utilise the same case design as the companys existing 72/73xx controllers and promises to deliver an outstanding collection of load sharing/synchronising control modules. 

    Full information on the control modules can be found within the products section of the website.

  • We have just launched our brand new download area, which we have created to make it easier and quicker for our web users to find the documentation/software they require on our range of control modules.

    We have replaced the old grid style layout with an intuitive page that presents only the files you need after asking you a few short questions.  This new layout gives us the flexibility to add new files and categories extremely easily without outgrowing our page design.

    If you have any questions at all about how the new page operates then please do not hesitate to contact us. 

  • We are delighted to announce that we will be holding regular monthly training events at our head office in North Yorkshire, UK .  The dates below run up until the end of this year.  The courses are as follows:

    Wednesday 10th September 2008 - Full Module Overview Training (NOW FULLY BOOKED)

    Tuesday 7th October 2008 - Load Share Training

    Tuesday 4th November 2008 - Full Module Overview Training (NOW FULLY BOOKED)

    Tuesday 2nd December 2008 - Load Share Training

    All training events run 10am - 4pm.

    If you would like to register your place on one of these training events please contact us on  0044 (0) 1723 890099 and ask for Technical Support or email support@deepseaplc.com

    we look forward to seeing you on one of the above dates!

    • [ Read In Full ] NEW BATTERY CHARGER ADDED TO DSE EXTRA RANGE
    • 2008-07-18 14:23:06

  • Deep Sea Electronics has added a 5 Amp 24 Volt charger to its new range of switch-mode battery chargers within the DSEExtra Series meaning there are now four different rated chargers to choose from..  The charger has been designed to fit within the same case design as the existing 5 Amp 12 Volt Charger and includes all the same advanced functionality.  The new charger will be called a DSE9255 and will be available to work with lead acid, nicad and other battery types.  The charger will be available to order from 01/08/08.

    Full product information will be added to the products section of the site shortly.

     

    • [ Read In Full ] DSE3110 MANUAL AND AUTO START - LAUNCH DATE 11TH AUGUST 2008
    • 2008-07-18 14:05:11

  • The company's latest addition to its next generation of contol modules is set for launch on the 11th August 2008.  The module promises to deliver outstanding features and advanced functionality in a compact module enclosure.  The module will work with electronic engines and will be available in two variants, magnetic pick-up and canbus.  Both modules will monitor engine speed, frequency, run hours and voltage.  There will be six digital inputs and 4 outputs as standard, a back-lit LCD display  and the ability to program the module using the DSE Configuration Suite PC Software.

    Full information on the DSE3110, including data sheet, and supporting documentation is now on the website.

    • [ Read In Full ] DSE ALL SET FOR LAUNCH OF NEW MULTI-SET COMMUNICATIONS SOFTWARE
    • 2008-07-02 10:26:56

  • Deep Sea Electronics is delighted to announce its DSE850 Multi-Set Communications Remote Monitoring and Control Software will be available from August 2008.  The software has been designed to work with the company’s load share controllers (DSE5510, DSE5520, DSE5560), with plans to make the software compatible with additional DSE controllers in the near future.

     

     

    How Does It Work?
    The DSE Ethernet controller is connected to the internet and all DSE control modules that are on-site. The Ethernet controller requires a fixed internal IP address that can be configured to be visible over the internet. Once the IP address can be accessed over the internet then sites can be viewed from any internet connection in the world. The system has been designed to display information on a maximum of 16 gen-sets and 4 mains (utilities) or 24 gen-sets with no mains (utilities). The software is easy to set up and DSE controllers can easily be added to the system using the software’s intuitive ‘Add Controller’ page. The Ethernet device also includes RS232 and RS485 communications ports.  The RS232 port is used if you are only connecting one control module and the RS485 port is used if you are connecting multiple modules. The data taken from the DSE controllers is refreshed every 1-11 seconds (dependent on connection speed).
    What Features Does It Include?
    ·         Clear alarms & re-start generators
    ·         Multiple password levels (Read only, minor changes, full control)
    ·         Log into system from any web connection
    ·         Multi or single set compatible
    ·         Easy to use graphical interface
    ·         System overview screen with instant status indication of gen-sets
    ·         Fully detailed controller screens
    ·         User configurable data logging
    ·         Logs can be downloaded to a local computer for importing data into spreadsheets
    ·         Alarms with multiple trigger levels
    ·         RS232 and RS485 communications ports
    ·         Common screen layouts for ease of use
    ·         Email support
    ·         Remotely upgradeable firmware
    ·         Controller communication log page
    ·         Colour engine status indicators – Blue = At rest, Green = Running OK, Grey = Lost contact, Yellow = Warning alarm, Red = Shutdown
    ·         Software can display site names on each page for easy identification
    What Benefits Does It Offer?
    • View site status quickly and easily
    • System can send email notification in the event of a change in engine status, engine warning or engine shutdown to a defined email addresses
    • Alarms can be cleared and generators re-started (If no site maintenance is required)
    • Software can be used to identify trends in engine behaviour
    • Allows multiple sites to be monitored from one location (Each site needs its own IP address)
    • Full module control
    • Gives information for basic fault finding diagnosis before attending site
    • Can be used on an intranet site for monitoring internally
    Java is required to run all features of the Multi-Set Comms software.
    • [ Read In Full ] DSE7000 SERIES ENHANCED WITH INDUSTRY LEADING FEATURES
    • 2008-05-06 15:26:03

  • Deep Sea Electronics is delighted to announce the addition of new industry leading features to the DSE7000 Series. All features are now available and units already in the field can be upgraded on-site to include these.  The new version of the software for this product is readily available to download from the download area of the website.

    New Features Include:

    KW Overload Protection - This feature allows the user to Set KW protection to their required level.  If KW goes above this preset level for a user defined amount of time, the module will trip the breaker and cool the engine down before it stops. 

    Auto Voltage Sensing/Alternative Configuration (DSE73xx Only) -  This feature removes the need to re-configure the module when moving a generating set from one site to another site with a different wiring topology. The module will automatically detect the changes to the alternator wiring topology and re-configure itself accordingly.

    Dual Mutual Standby - This feature is utilised in installations where two generators are installed to reduce the risk of failure.  The two generators can be configured to act as back up to each other in case of a failure, whilst also periodically transferring the load from generator to generator in order to balance the running hours.

    Phase Rotation - This feature prevents the generator from running if connected incorrectly.

    Earth Fault Trip (DSE73xx only) - In the event of an earth fault being detected the control module will protect the generating set and provide a controlled shutdown.

    Negative Phase Sequence (Unbalanced Load) - If the load is unbalanced the control module will prevent damage to the alternator by disconnecting the load and cooling the engine down before it stops.

    Edison Delta Topology (3 Phase 4 Wire) - This allows the user to configure the module to work with a different alternator configuration. The addition of Edison Delta wiring support is a reflection of the products flexibility within a truly global market.

    Water Heater Control - This feature is used to control engine heating devices when operating engines in cold climates.

    Water Cooler Control - This feature is used to control engine cooling devices when operating engines in warm climates. 

    Dual Function ‘Stop and Panel Lock’ Input Option - A digital input is provided to place the module in stop mode and lock the front panel so that it cannot be started. This feature could be utilised when maintenance work is being carried out.

     

  • DSE are delighted to announce the launch of thier latest collection of switch mode battery chargers.  The new collection is made up of three different sized chargers which are available to order now.

    About the Chargers: 

    The 2 Amp, 3.7 Amp and 5 Amp Battery Chargers have been designed to be permanently connected to batteries, keeping them charged to their maximum capacity.  The chargers can be either mounted via DIN Rail or to the Chassis, using the fixing holes that are built into the case. The chargers stylish design includes an LED indicator on the front that shows when the charger is in a normal or overload condition.  To improve reliability the chargers do not include any moving parts.  They will also continue to operate during cranking and running. The chargers can also accept multiple AC voltage connections.

     

     

    ADVANCED FEATURES

     

    Multi-Stage Intelligent Charging

    ·         Constant, maximum current during charge recovery phase

    ·         Chargers automatically return to float mode when charging is complete

    Low Output Ripple

    ·         Makes the chargers ideal for all battery types

    Full Protection

    ·         Reverse polarity protection, short circuit protection and current limiting

    Boost Mode

    ·         Boosts and equalises cell charge improving battery performance and life

    ·         Simple boost connection using on-board terminals

    Power Save Mode

    ·         Once the battery is fully charged the chargers switch to Eco-Power to save energy

     

    STANDARD FEATURES

    ·            Suitable for a wide range of battery types

    ·            No moving parts

    ·            Switched mode design

    ·            Charge fail output

    ·            Minimum 80% efficiency throughout full operating range

     

    Full information on the chargers can be found within the products section of the website and is also available to download from the site's download area.  The chargers will be on display at IPEE 2008 at the NEC in Birmingham 22nd-24th April 2008

    • [ Read In Full ] VISIT DEEP SEA AT IPEE 22ND-24TH APRIL 2008
    • 2008-01-21 12:33:22

  • Deep Sea Electronics is currently preparing for its second exhibition of 2008.  IPEE at the Birmingham NEC in the UK  promises to be a very exciting three days for the company.  The show will provide the company with another opportunity to promote the DSE7000 Series that was launched into the marketplace in January 2008.

    As well as the DSE7000 Series you will be able to view our extensive range of control modules including Load Sharing and DNV Certified modules.  We will also have our technical product staff on the stand so you will be able to discuss the full features and benefits of DSE's control range.

    You can find us in Hall 2 onStand B1.  We look forward to seeing you between the 22nd and 24th April 2008.

     

  • Following the successful launch of the DSE7000 Series at Power-Gen USA, the company can confirm that the modules within the series will be available to order from the 14th January 2008.

    For more information on each product within the series visit the products section on the website, or to get instant access to the Data Sheets go to the DSE Download section.

  • Deep Sea Electronics is delighted with the response to the launch of the DSE7000 Series and the number of people visiting the Booth has been outstanding. 

    Day 1 in full flow:

    • [ Read In Full ] DSE TO SHOWCASE ADDITIONAL NEW PRODUCTS AT POWER-GEN 07
    • 2007-12-04 11:39:01

  • As well as the launch of the new DSE7000 Series at the show in New Orleans in December, the company are to showcase an additional seven new products on the stand.

    The new collection of modules will be an excellent addtion to the successful range of DSE control solutions and will offer the end user a wide range of advanced features and benefits.

    Make sure you vist the Deep Sea Booth (#3729) to see these products for yourself, where we will be delighted to discuss them with you.

    • [ Read In Full ] VIST US AT BOOTH 3729 AT USA POWER-GEN 07
    • 2007-11-28 08:29:26

  • Deep Sea Electronics are exhibiting at this year's USA Power-Gen Show in New Orleans.  Make sure you visit the Booth (#3729) to see the brand new products that are now available.

    We look forward to meeting with you.

  • The launch of the DSE7000 Series has now taken place.  Power-Gen International in New Orleans is running for another 2 days so there is still plenty of time to see the best control modules the industry has ever seen.  The company is ready to take the industry by storm with its new gen-set control series.  More information on the DSE7000 Series is available on this site, see the products section.

    We look forward to meeting with you between the 11th and 13th December 2007 at the Ernest N. Morial Convention Center, New Orleans - Booth 3729.

  • On Monday 8th October 2007 Deep Sea Electronics Plc attended the annual ‘Yorkshire Business Insider Growth 100 Awards’, which celebrates the 100 fastest growing companies across the region.
     
    As well as celebrating the top 100’s achievements over the last year, special recognition awards were presented to the most dynamic and high achieving companies in the region.
     
    We are delighted to say that the company was presented with two awards. 
     
    The ‘International Award’ and the ‘Gold Medal Award’.
     
    The first award was in recognition of the company’s outstanding export business, which the company was delighted to win against some tough opposition.
     
    The second award was to identify the best business in the region over the last year. An independent panel of expert judges evaluated every company within the top 100 to find one company that excelled in all aspects of its business over the last 12 months. 
     
    The company was delighted to have been presented with this award and be officially crowned ‘The Best Business in Yorkshire 2007’.
     
     
    David Thomson, Sales & Marketing Director commented:
     

    ‘Receiving these two awards is a fantastic achievement for us. We have been working extremely hard over the last few years to expand our overseas markets, receiving this award for our export business shows how much we have achieved during this time. To receive the overall ‘Best Business Award’ is a real testament to the hard work of all the staff throughout the company. We are delighted to be recognised as Yorkshire’s number one company for 2007’.

     

    • [ Read In Full ] LOAD SHARING FOR MARINE APPLICATIONS - AVAILABLE NOW
    • 2007-09-26 12:53:47

  • We are delighted to add to our range of DNV approved modules for use within marine applications.  Following on from the success of the DSE5310M for single-set applications, we are now able to offer the DSE5510M for multiple set control.

    The module can be found within the products section of our site, where you can find out about all the features that it can offer.  The DSE Downloads area also includes all supporting information for the product which can be downloaded quickly and easily.

     

     

    • [ Read In Full ] DSE ADVISES MAJOR UK AIRPORT ON GENERATOR UPGRADES
    • 2007-08-30 09:10:51
  • Power back-up systems at Leeds Bradford International Airport (LBIA) required upgrading in 2007 and Rollo UK (Leeds) were commissioned to carry out a site survey and design the upgraded system, utilising existing generator sets. 

    Rollo engineers required Deep Sea Electronics expertise on site to help with the survey and give technical application advice, and one of DSE's specialist, Support Engineer's attended.

     

    LBIA currently have 5 generators fitted with DSE 509 modules operating emergency power for the main runway and approach lights, fire station and terminal buildings.  Site engineers needed the ability to carry out routine maintenance work on any of the generators without losing the emergency power supply.  This was particularly vital for the runway lighting as two gensets are used on a regular basis, as a precautionary safety measure, in times of bad weather when there is a higher chance of mains failure. This is a requirement of CAT III runway regulations.

    It was decided therefore, to introduce a new mobile genset which could be simply plugged in when any of the existing sets were not available; for example during routine maintenance.  This meant that temporary loss of emergency power would no longer be an issue and aided regulation compliance.
     
    The existing gensets are due to be refurbished and fitted with new DSE5320 Auto Mains Failure modules, which were chosen because of the functionality, support for the CAT III specification and for  their compatibility with a wide range of engine types, including electronic engines.
     
    The site survey was completed in June 2007 and the project will be completed later in the year.
  •  
    A DSE customer training event was organised in August 2007 for Site Technology Ltd. at the customer’s premises in central Abu Dhabi, UAE.
     
    Site Technology is a long established company specialising in all aspects of site management including integrated security, power, traffic and safety systems. 
     
    The Company, which is highly respected throughout the Emirates, has been using DSE control modules for many years but wanted to enhance their knowledge through DSE’s specialist training.
     
    Tony Manton, DSE’s Customer Support Engineer, travelled to site to meet 9 of the customer’s top engineers from the Power Division. Taking part in the 2-day training experience, they covered all aspects of the DSEPower® and DSEControl® Series, which included recommendations for a number of different typical applications. In-depth question and answer sessions also enabled the engineers to cover technical topics relating to potential future projects which included load sharing and AMF solutions.
     
    Mr Ayman Hegab, Service Manager for Diesel Generators at Site Technology Ltd., was delighted with the training course and believed it had proved a massive benefit for all his engineers.
     
    This successful event was the latest of a series of training seminars undertaken by DSE’s Customer Support team who have, during 2007, also visited Greece, Russia, Cuba, Egypt, Brazil, Qatar, Ireland, Mexico, Peru, USA, Turkey and many sites throughout the UK.
     
    For further information on training, please contact: marketing@deepseaplc.com
     

    The picture shows Site Technology's Board room where the training event took place.

  • The company is delighted to be on the road with ABB, the global leader in power and automation technologies. ABB specialise in enabling utility and industry customers to improve their performance at the same time as lowering their environmental impact.


    ABB are currently travelling around North America with their training road show truck, which includes a DSE5310 to control the generator that is on-board.


    Image shows the truck on the way to its next training destination. 
     

    More information will follow soon…

  • The company has just finished assisting PowerOhm with the installation of a two set load sharing system in County Cork, Eire. The installation signalled the end of a highly in-depth project that the company had been involved with from the early stages. 
     
    The site owned by Centocor Inc a subsidiary of Johnson & Johnson has been developed to concentrate on developing products for the detection and treatment of a wide number of human diseases.
     
    The site consists of two sets that have been installed to provide mains back-up and no break return. Each set has a DSE5510 that is controlled by a DSE5560 to back-up one of two loads. The sets have been designed to run independently of each other and only parallel with the mains supply. 
     
    Image below shows one of the Gensets on site.
     
     
     
     
    Centocor Inc only allowed a two hour window to finalise the commissioning of the two sets. Due to the high profile nature of the site it was important that the commissioning was finished during this period. Working closely with PowerOhm during the two hour window enabled the site to be set-up and left in full working condition.
     
    Before the company left site, testing of the parallel operation, island mode and no break return were all successfully tested. As a result the end users were extremely pleased that their site was fully operational. It was also an excellent opportunity for the company to increase PowerOhm’s knowledge of load sharing and all the features within the DSEPower® Series.
     

    Image below shows Centocor’s Irish Site.

  • The company has just successfully supplied its products for installation at the Halley VI Research Station in Antarctica. 
     
    Westac Power Ltd have built and tested four generating sets for the research station. The units have been designed in a unique power and heat configuration, where the generator engine not only provides the station with power but makes use of the waste heat to warm the buildings and also melt snow to provide fresh water.
     
    The DSE controllers in use are the DSE5510 control modules, part of the DSEPower® Series. The DSE5510’s were chosen because of their load sharing capability, allowing all machines to be used to provide a common power supply for the entire station.
     
    The site has four DSE5510’s working together, which control the output of each unit depending on the power and heat requirements. The intelligence of the control modules ensures that each unit is constantly working to its optimum output level.
     
    The site also uses a DSE820 Interface Module so that all four DSE5510’s and units can be monitored remotely via the internet. This provides the user with peace of mind, as they can see that the site is operating at the correct levels from any remote location where internet access is available.
     
    David Thomson, Sales & Marketing Director commented:
     
    ‘We are delighted to be involved with this project. It is fantastic that our controllers are going to be providing load share functionality within such an extreme environment. We designed the DSEPower® range of load share modules to offer the user outstanding features combined with simple, user-friendly set up and operating functions. We hope to work with Westac on many more projects of this kind in the future’.

     

    Picture shows how the Halley VI Research Station will look upon completion:

  • The company has just finished exhibiting at Power-Gen Madrid. The exhibition which was running for three days between the 26th and 28th June enabled the company to promote two of its new product ranges. 
     
    The DSEMarine® series attracted a huge amount of interest from existing and potential new customers. Many companies were pleased to see that the company was now able to supply its high quality products for use on-board vessels. The DSE7000 Series, which promises to be the most technically advanced and user-friendly control solution the market has ever seen received exceptional feedback on its look, feel and functionality.
     
    The company was also pleased with the positive feedback received on the new brand image. The company’s next exhibition will be at Power-Gen International in New Orleans, America between the 11th and 13th December 2007. We look forward to seeing you there.
     
     Please see image of the stand below:

     

     

     

  • The company is delighted with the response it has received from the industry on the rebranding exercise it has just carried out.  Comments have been sent from all corners of the world congratulating the company on its new corporate identity. 

    David Thomson, Sales & Marketing Director commented:

    'We are extremely pleased with the response we have had from the industry on our new corporate identity.  We were confident that the new brand would have a positive impact but could not have anticipated the amount of positive feedback we have actually received.  It is now important that we continually build on the brand to remain at the front of everyone’s minds'.

  • We are exhibiting at Powergen Europe from 26th to 28th June 2007, where we will be launching two exciting new product ranges, the DSE7000 Series, taking gen-set control to a whole new level and the DSEMarine® Series,taking DSE controls to a wider audience.

    What does the DSE7000 Series offer?

    • Improved user interface
    • Increased inputs and outputs
    • Significantly enhanced feature list
    • Designed specifically for the Power Generation Industry
    • Electronic engine compatibility
    • Plus much more

    What does the DSEMarine® Series offer

    • Full DNV certification
    • Electronic engine compatibility
    • Muti-set load sharing
    • Remote control and monitoring
    • Plus much more

    We are extremely excited about these two new product ranges, the DSEMarine® Series includes a wide range of features and allows us to take the recognised quality of DSE into a new market area.

    The DSE7000 Series will be the most advanced collection of modules the market has ever seen. The benefits that the product range offers will make your trip to Madrid extremely worthwhile.

    We would be delighted if you could join us in Madrid on Stand E79 to see for yourself the product that is going to be the talk of the industry for many years to come!

    Powergen Europe
    Hall 10, Feria de Madrid
    Madrid, Spain
    26th – 28th June 2007
    Stand number E79

    • [ Read In Full ] DEEP SEA ELECTRONICS PLC LAUNCHES NEW CORPORATE IDENTITY
    • 2007-05-24 17:38:16

  • Deep Sea Electronics Plc is delighted to announce that it has undergone a full strategic re-branding exercise and from the 30th May 2007 the company will be represented by a new logo and supporting materials.

    The company which has been at the forefront of the power generation industry for over 30 years has created a new brand that will further strengthen the DSE name across the world and will move forward with the company for many years to come. The company has created a new strap line ‘Complex Solutions Made Simple’ which promotes the company’s design process of making complicated solutions as simple for the end user to operate as possible.

    The company has worked hard to create a range of new materials that deliver information to the customer in a clear and concise manner. The company are confident that their new materials will become recognised as the best within the industry.

    DSE’s Sales & Marketing Director Mr David Thomson commented:

    ‘The company has been the leading control solutions provider within the power generation industry for many years. We decided that to complement our advanced range of control solutions we needed to develop a brand image that reflected our position as market leaders. We feel that the new brand achieves this and gives us an extremely powerful tool to continue our growth over the coming years.

    To coincide with the re-brand the company has also completely re-designed their corporate website to mirror the new identity. The site will play an extremely important role for the company acting as the ultimate resource for the company’s products and services.

  • Deep Sea Electronics plc has begun development of phase 3 of their prestigious North Yorkshire design and manufacturing facility. This phase involves building a large, two-story  warehouse and offices within the grounds of the existing site. 
     
    The additional space has become essential as DSE continues to see increasing sales across the globe, and while many companies have turned to cheaper manufacturing locations such as the Far East or India, DSE maintains it’s quality edge by further investment in the UK.
     
    The new facility, which will be operational by July, will provide the Company with an additional 14,500 square feet and will provide much needed space for the growing as well as additional warehousing and storage.
     
    Mr Eddie Sheader, Managing Director, said “We moved to this site in 2001 because it gave us the space necessary for our forecasted growth. We are looking forward to the completion of Phase 3 which will allow us to develop further.”